On Fri, 2018-07-27 at 20:58 +0530, Sibi Sankar wrote:
> Add reset controller for SDM845 SoC to control reset signals
> provided by PDC for Modem, Compute, Display, GPU, Debug, AOP,
> Sensors, Audio, SP and APPS
>
> Signed-off-by: Sibi Sankar <si...@codeaurora.org>
> ---
> drivers/reset/Kconfig | 9 +++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-qcom-pdc.c | 139 +++++++++++++++++++++++++++++++++
> 3 files changed, 149 insertions(+)
> create mode 100644 drivers/reset/reset-qcom-pdc.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 13d28fdbdbb5..5344e202a630 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -98,6 +98,15 @@ config RESET_QCOM_AOSS
> reset signals provided by AOSS for Modem, Venus, ADSP,
> GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
>
> +config RESET_QCOM_PDC
> + bool "Qcom PDC Reset Driver"
> + depends on ARCH_QCOM || COMPILE_TEST
> + help
> + This enables the PDC (Power Domain Controller) reset driver
> + for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
> + to control reset signals provided by PDC for Modem, Compute,
> + Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
> +
> config RESET_SIMPLE
> bool "Simple Reset Controller Driver" if COMPILE_TEST
> default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI ||
> ARCH_ZX || ARCH_ASPEED
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 4243c38228e2..d08e8b90046a 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_RESET_MESON_AUDIO_ARB) +=
> reset-meson-audio-arb.o
> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
> obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
> +obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c
> new file mode 100644
> index 000000000000..64a0041e3452
> --- /dev/null
> +++ b/drivers/reset/reset-qcom-pdc.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/regmap.h>
> +#include <linux/of_device.h>
> +#include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +
> +struct qcom_pdc_reset_map {
> + u8 bit;
> +};
> +
> +struct qcom_pdc_desc {
> + const struct regmap_config *config;
> + const struct qcom_pdc_reset_map *resets;
> + size_t num_resets;
> +};
> +
> +struct qcom_pdc_reset_data {
> + struct reset_controller_dev rcdev;
> + struct regmap *regmap;
> + const struct qcom_pdc_desc *desc;
> +};
> +
> +static const struct regmap_config sdm845_pdc_regmap_config = {
> + .name = "pdc-reset",
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x20000,
> + .fast_io = true,
> +};
> +
> +static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = {
> + [PDC_APPS_SYNC_RESET] = {0},
> + [PDC_SP_SYNC_RESET] = {1},
> + [PDC_AUDIO_SYNC_RESET] = {2},
> + [PDC_SENSORS_SYNC_RESET] = {3},
> + [PDC_AOP_SYNC_RESET] = {4},
> + [PDC_DEBUG_SYNC_RESET] = {5},
> + [PDC_GPU_SYNC_RESET] = {6},
> + [PDC_DISPLAY_SYNC_RESET] = {7},
> + [PDC_COMPUTE_SYNC_RESET] = {8},
> + [PDC_MODEM_SYNC_RESET] = {9},
> +};
> +
> +static const struct qcom_pdc_desc sdm845_pdc_desc = {
> + .config = &sdm845_pdc_regmap_config,
> + .resets = sdm845_pdc_resets,
> + .num_resets = ARRAY_SIZE(sdm845_pdc_resets),
> +};
> +
> +static inline struct qcom_pdc_reset_data *to_qcom_pdc_reset_data(
> + struct reset_controller_dev *rcdev)
> +{
> + return container_of(rcdev, struct qcom_pdc_reset_data, rcdev);
> +}
> +
> +static int qcom_pdc_control_assert(struct reset_controller_dev *rcdev,
> + unsigned long idx)
> +{
> + struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
> + const struct qcom_pdc_reset_map *map = &data->desc->resets[idx];
> +
> + return regmap_update_bits(data->regmap, 0x100,
Does this register have a name? If so, a #define would be preferable.
Otherwise this driver looks fine to me.
> + BIT(map->bit), BIT(map->bit));
> +}
> +
> +static int qcom_pdc_control_deassert(struct reset_controller_dev *rcdev,
> + unsigned long idx)
> +{
> + struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
> + const struct qcom_pdc_reset_map *map = &data->desc->resets[idx];
> +
> + return regmap_update_bits(data->regmap, 0x100, BIT(map->bit), 0);
> +}
> +
> +static const struct reset_control_ops qcom_pdc_reset_ops = {
> + .assert = qcom_pdc_control_assert,
> + .deassert = qcom_pdc_control_deassert,
> +};
> +
> +static int qcom_pdc_reset_probe(struct platform_device *pdev)
> +{
> + struct qcom_pdc_reset_data *data;
> + struct device *dev = &pdev->dev;
> + const struct qcom_pdc_desc *desc;
> + void __iomem *base;
> + struct resource *res;
> +
> + desc = of_device_get_match_data(dev);
> + if (!desc)
> + return -EINVAL;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->desc = desc;
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + data->regmap = devm_regmap_init_mmio(dev, base, desc->config);
> + if (IS_ERR(data->regmap)) {
> + dev_err(dev, "Unable to get pdc-global regmap");
> + return PTR_ERR(data->regmap);
> + }
> +
> + data->rcdev.owner = THIS_MODULE;
> + data->rcdev.ops = &qcom_pdc_reset_ops;
> + data->rcdev.nr_resets = desc->num_resets;
> + data->rcdev.of_node = dev->of_node;
> +
> + return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
> +static const struct of_device_id qcom_pdc_reset_of_match[] = {
> + { .compatible = "qcom,sdm845-pdc-global", .data = &sdm845_pdc_desc },
> + {}
> +};
> +
> +static struct platform_driver qcom_pdc_reset_driver = {
> + .probe = qcom_pdc_reset_probe,
> + .driver = {
> + .name = "qcom_pdc_reset",
> + .of_match_table = qcom_pdc_reset_of_match,
> + },
> +};
> +
> +builtin_platform_driver(qcom_pdc_reset_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm PDC Reset Driver");
> +MODULE_LICENSE("GPL v2");
regards
Philipp
