[PATCH V7 5/5] mmc: sdhci: Add MSI interrupt support for O2 SD host

[ernest.zhang]

Add MSI interrupt support if the SD host device can support MSI interrupt.

Signed-off-by: ernest.zhang <ernest.zh...@bayhubtech.com>
---
Changes in V7:
        N/A

Changes in V6:
        1. Move change log to correct place.
        2. Reduce unneeded pr_info prints.
        3. In function sdhci_pci_o2_probe_slot, remove using local
        variable 'mmc' instead of using 'host->mmc'.
        4. Make the msi enable code a sperate function.

Changes in V5:
        1. Because pci_enable_msi is marked as deprecated and should not be
        used in new code, use pci_alloc_irq_vectors instead.
        2. Remove unneeded CONFIG_PCI_MSI macro check.

Changes in V4:
        Enable MSI interrupt if the MSI capability bit is set in
        capability register.

Changes in V1~V3:
        N/A
---
 drivers/mmc/host/sdhci-pci-o2micro.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c 
b/drivers/mmc/host/sdhci-pci-o2micro.c
index 7747e8ba2e3d..56bc71763956 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -260,6 +260,29 @@ static void sdhci_pci_o2_fujin2_pci_init(struct 
sdhci_pci_chip *chip)
        pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
 }
 
+static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip,
+                                   struct sdhci_host *host)
+{
+       int ret;
+
+       ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI);
+       if (!ret) {
+               pr_info("%s: unsupport msi, use INTx irq\n",
+                       mmc_hostname(host->mmc));
+               return;
+       }
+
+       ret = pci_alloc_irq_vectors(chip->pdev, 1, 1,
+                                   PCI_IRQ_MSI | PCI_IRQ_MSIX);
+       if (ret < 0) {
+               pr_err("%s: enable PCI MSI failed, err=%d\n",
+                      mmc_hostname(host->mmc), ret);
+               return;
+       }
+
+       host->irq = pci_irq_vector(chip->pdev, 0);
+}
+
 int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 {
        struct sdhci_pci_chip *chip;
@@ -279,6 +302,8 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
                if (reg & 0x1)
                        host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
 
+               sdhci_pci_o2_enable_msi(chip, host);
+
                if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
                        ret = pci_read_config_dword(chip->pdev,
                                                    O2_SD_MISC_SETTING, &reg);
-- 
2.17.1