Thank you, Thierry. Have you also reviewed and accepted the other 3 patches in this serial?
Regards, Shenwei -----Original Message----- From: Thierry Reding [mailto:thierry.red...@gmail.com] Sent: Monday, July 9, 2018 12:09 PM To: Shenwei Wang <shenwei.w...@nxp.com> Cc: linux-...@vger.kernel.org; dl-linux-imx <linux-...@nxp.com>; linux-kernel@vger.kernel.org Subject: Re: [PATCH v2 1/4] pwm: fsl-ftm: Added a dedicated IP interface clock On Fri, Jun 08, 2018 at 02:22:34PM -0500, shenwei.w...@nxp.com wrote: > The current driver assumes that the ftm_sys clock works as one of the > clock sources for the IP block as well as the IP interface clock. This > assumption does not apply any more on the latest i.MX8x SoC family. On > i.MX8x SoCs, a dedicated IP interface clock is introduced and it must > be enabled before accessing any FTM registers. Moreover, the clock can > not be used as the source clock for the FTM IP block. This patch > introduces the ipg_clk as the dedicated IP interface clock and by > default it is the same as the ftm_sys clock if not specified. > > Signed-off-by: Shenwei Wang <shenwei.w...@nxp.com> > --- > drivers/pwm/pwm-fsl-ftm.c | 22 ++++++++++++++++------ > 1 file changed, 16 insertions(+), 6 deletions(-) Applied, thanks. Thierry
