On Thu, 5 Jul 2018 15:18:58 -0600 Rob Herring <r...@kernel.org> wrote:
> On Wed, Jul 04, 2018 at 05:32:53PM +0300, Stefan Popa wrote: > > Signed-off-by: Stefan Popa <stefan.p...@analog.com> > > --- > > Changes in v5: > > - used a dac@0 as a more generic node name instead of ad5758@0. > > Changes in v4: > > - Nothing changed, just to follow the patch set version. > > Changes in v3: > > - AD5758 can be both a current and voltage output DAC. The > > decision is made based on the DT and the channel type is set > > during probe. > > - range was replaced by range-microvolt and range-microamp > > - dc-dc-mode, range-microvolt and range-microamp are required > > properties. > > - Introduced a slew-time-us property from which slew rate clock > > and slew rate step are calculated using a best match algorithm. > > - Added units in the name of the properties. > > - Offered more explanation for the various modes of operation. > > > > Changes in v2: > > - Nothing changed, just to follow the patch set version. > > > > .../devicetree/bindings/iio/dac/ad5758.txt | 73 > > ++++++++++++++++++++++ > > MAINTAINERS | 1 + > > 2 files changed, 74 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5758.txt > > Reviewed-by: Rob Herring <r...@kernel.org> There was a bit of white space weirdness in here and some lines that needed breaking. I fixed up whilst applying. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Also feels like I haven't explicitly thanked Rob in a while, so... thanks Rob for your tireless work on making sure we keep idiocy in device tree bindings to a minimum! Jonathan
