This patch series adds PCIe PHY support for both PAXB and PAXC root complex in Broadcom Stingray SOC
This patch series is based off v4.18-rc3 and is available on GIHUB: repo: https://github.com/Broadcom/arm64-linux.git branch: sr-pcie-phy-v4 Changes since v3: - Add missing node unit address in binding document - Remove redundant dummy PHY callbacks in the driver - Other miscellaneous minor fixes based on feedback from Kishon Changes since v2: - Add 'reg' property to the driver so it can access the PCIe SS PHY block - Rebase to v4.18-rc3 Changes since v1: - Rebase from v4.17-rc5 to v4.18-rc1 Ray Jui (2): dt-bindings: phy: Add binding doc for Stingray PCIe PHY phy: bcm-sr-pcie: Add Stingray PCIe PHY driver .../devicetree/bindings/phy/brcm,sr-pcie-phy.txt | 41 +++ drivers/phy/broadcom/Kconfig | 10 + drivers/phy/broadcom/Makefile | 2 + drivers/phy/broadcom/phy-bcm-sr-pcie.c | 305 +++++++++++++++++++++ 4 files changed, 358 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt create mode 100644 drivers/phy/broadcom/phy-bcm-sr-pcie.c -- 2.1.4
