On Thu, Jun 28, 2018 at 09:18:03PM +0200, Saravanan Sekar wrote:
> Added clock management controller for S700
>
> Signed-off-by: Parthiban Nallathambi <p...@denx.de>
> Signed-off-by: Saravanan Sekar <sravanh...@gmail.com>
> ---
> .../boot/dts/actions/s700-cubieboard7.dts | 7 -
> arch/arm64/boot/dts/actions/s700.dtsi | 8 ++
> include/dt-bindings/clock/actions,s700-cmu.h | 128 ++++++++++++++++++
> 3 files changed, 136 insertions(+), 7 deletions(-)
> create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
>
> diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> index ef79d7905f44..28f3f4a0f7f0 100644
> --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> @@ -28,12 +28,6 @@
> device_type = "memory";
> reg = <0x1 0xe0000000 0x0 0x0>;
> };
> -
> - uart3_clk: uart3-clk {
> - compatible = "fixed-clock";
> - clock-frequency = <921600>;
> - #clock-cells = <0>;
> - };
Sourcing CMU clock for UART should be in a separate patch.
> };
>
> &timer {
> @@ -42,5 +36,4 @@
>
> &uart3 {
> status = "okay";
> - clocks = <&uart3_clk>;
> };
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi
> b/arch/arm64/boot/dts/actions/s700.dtsi
> index 66dd5309f0a2..3530b705df90 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/actions,s700-cmu.h>
>
> / {
> compatible = "actions,s700";
> @@ -44,6 +45,12 @@
> };
> };
>
> + clock: clock-controller@e0168000 {
> + compatible = "actions,s700-cmu";
> + reg = <0 0xe0168000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
There is no fixed rate clock like losc?
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -129,6 +136,7 @@
> compatible = "actions,s900-uart", "actions,owl-uart";
> reg = <0x0 0xe0126000 0x0 0x2000>;
> interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_UART3>;
> status = "disabled";
> };
>
> diff --git a/include/dt-bindings/clock/actions,s700-cmu.h
> b/include/dt-bindings/clock/actions,s700-cmu.h
> new file mode 100644
> index 000000000000..e5b4ea130953
> --- /dev/null
> +++ b/include/dt-bindings/clock/actions,s700-cmu.h
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Actions S700 clock driver
> + *
> + * Copyright (c) 2014 Actions Semi Inc.
> + * Author: David Liu <liu...@actions-semi.com>
> + *
> + * Author: Pathiban Nallathambi <p...@denx.de>
> + * Author: Saravanan Sekar <sravanh...@gmail.com>
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_S700_H
> +#define __DT_BINDINGS_CLOCK_S700_H
> +
> +#define CLK_NONE 0
> +
> +/* fixed rate clocks */
> +#define CLK_LOSC 1
> +#define CLK_HOSC 2
> +
> +/* pll clocks */
> +#define CLK_CORE_PLL 3
> +#define CLK_DEV_PLL 4
> +#define CLK_DDR_PLL 5
> +#define CLK_NAND_PLL 6
> +#define CLK_DISPLAY_PLL 7
> +#define CLK_TVOUT_PLL 8
> +#define CLK_CVBS_PLL 9
> +#define CLK_AUDIO_PLL 10
> +#define CLK_ETHERNET_PLL 11
> +
Remove extra new line please.
> +
> +/* system clock */
> +#define CLK_SYS_BASE 12
> +#define CLK_CPU CLK_SYS_BASE
> +#define CLK_DEV (CLK_SYS_BASE+1)
> +#define CLK_AHB (CLK_SYS_BASE+2)
> +#define CLK_APB (CLK_SYS_BASE+3)
> +#define CLK_DMAC (CLK_SYS_BASE+4)
> +#define CLK_NOC0_CLK_MUX (CLK_SYS_BASE+5)
> +#define CLK_NOC1_CLK_MUX (CLK_SYS_BASE+6)
> +#define CLK_HP_CLK_MUX (CLK_SYS_BASE+7)
> +#define CLK_HP_CLK_DIV (CLK_SYS_BASE+8)
> +#define CLK_NOC1_CLK_DIV (CLK_SYS_BASE+9)
> +#define CLK_NOC0 (CLK_SYS_BASE+10)
> +#define CLK_NOC1 (CLK_SYS_BASE+11)
> +#define CLK_SENOR_SRC (CLK_SYS_BASE+12)
> +
> +/* peripheral device clock */
> +#define CLK_PERIP_BASE 25
> +#define CLK_GPIO (CLK_PERIP_BASE)
> +#define CLK_TIMER (CLK_PERIP_BASE+1)
> +#define CLK_DSI (CLK_PERIP_BASE+2)
> +#define CLK_CSI (CLK_PERIP_BASE+3)
> +#define CLK_SI (CLK_PERIP_BASE+4)
> +#define CLK_DE (CLK_PERIP_BASE+5)
> +#define CLK_HDE (CLK_PERIP_BASE+6)
> +#define CLK_VDE (CLK_PERIP_BASE+7)
> +#define CLK_VCE (CLK_PERIP_BASE+8)
> +#define CLK_NAND (CLK_PERIP_BASE+9)
> +#define CLK_SD0 (CLK_PERIP_BASE+10)
> +#define CLK_SD1 (CLK_PERIP_BASE+11)
> +#define CLK_SD2 (CLK_PERIP_BASE+12)
> +
> +#define CLK_UART0 (CLK_PERIP_BASE+13)
> +#define CLK_UART1 (CLK_PERIP_BASE+14)
> +#define CLK_UART2 (CLK_PERIP_BASE+15)
> +#define CLK_UART3 (CLK_PERIP_BASE+16)
> +#define CLK_UART4 (CLK_PERIP_BASE+17)
> +#define CLK_UART5 (CLK_PERIP_BASE+18)
> +#define CLK_UART6 (CLK_PERIP_BASE+19)
> +
> +#define CLK_PWM0 (CLK_PERIP_BASE+20)
> +#define CLK_PWM1 (CLK_PERIP_BASE+21)
> +#define CLK_PWM2 (CLK_PERIP_BASE+22)
> +#define CLK_PWM3 (CLK_PERIP_BASE+23)
> +#define CLK_PWM4 (CLK_PERIP_BASE+24)
> +#define CLK_PWM5 (CLK_PERIP_BASE+25)
> +#define CLK_GPU3D (CLK_PERIP_BASE+26)
> +
> +#define CLK_I2C0 (CLK_PERIP_BASE+27)
> +#define CLK_I2C1 (CLK_PERIP_BASE+28)
> +#define CLK_I2C2 (CLK_PERIP_BASE+29)
> +#define CLK_I2C3 (CLK_PERIP_BASE+30)
> +
> +
> +#define CLK_SPI0 (CLK_PERIP_BASE+31)
> +#define CLK_SPI1 (CLK_PERIP_BASE+32)
> +#define CLK_SPI2 (CLK_PERIP_BASE+33)
> +#define CLK_SPI3 (CLK_PERIP_BASE+34)
> +
> +#define CLK_USB3_480MPLL0 (CLK_PERIP_BASE+35)
> +#define CLK_USB3_480MPHY0 (CLK_PERIP_BASE+36)
> +#define CLK_USB3_5GPHY (CLK_PERIP_BASE+37)
> +#define CLK_USB3_CCE (CLK_PERIP_BASE+48)
> +#define CLK_USB3_MAC (CLK_PERIP_BASE+49)
> +
> +
> +#define CLK_LCD (CLK_PERIP_BASE+50)
> +#define CLK_HDMI_AUDIO (CLK_PERIP_BASE+51)
> +#define CLK_I2SRX (CLK_PERIP_BASE+52)
> +#define CLK_I2STX (CLK_PERIP_BASE+53)
> +
> +#define CLK_SENSOR0 (CLK_PERIP_BASE+54)
> +#define CLK_SENSOR1 (CLK_PERIP_BASE+55)
> +
> +#define CLK_HDMI_DEV (CLK_PERIP_BASE+56)
> +
> +#define CLK_ETHERNET (CLK_PERIP_BASE+59)
> +#define CLK_RMII_REF (CLK_PERIP_BASE+60)
> +
> +#define CLK_USB2H0_PLLEN (CLK_PERIP_BASE+61)
> +#define CLK_USB2H0_PHY (CLK_PERIP_BASE+62)
> +#define CLK_USB2H0_CCE (CLK_PERIP_BASE+63)
> +#define CLK_USB2H1_PLLEN (CLK_PERIP_BASE+64)
> +#define CLK_USB2H1_PHY (CLK_PERIP_BASE+65)
> +#define CLK_USB2H1_CCE (CLK_PERIP_BASE+66)
> +
> +
> +#define CLK_TVOUT (CLK_PERIP_BASE+67)
> +
> +#define CLK_THERMAL_SENSOR (CLK_PERIP_BASE+68)
> +
> +#define CLK_IRC_SWITCH (CLK_PERIP_BASE+69)
> +#define CLK_PCM1 (CLK_PERIP_BASE+70)
> +#define CLK_NR_CLKS (CLK_PCM1) /* update on adding new clk
> */
> +
Since the index starts from 0, CLK_NR_CLKS should be CLK_PCM1 + 1
Thanks,
Mani
> +#endif /* __DT_BINDINGS_CLOCK_S700_H */
> --
> 2.18.0
>
