On Mon, Jun 04, 2018 at 11:27:43AM +0200, Benjamin Berg wrote: > Hi, > > On Thu, 2018-05-24 at 16:33 +0800, Chris Chiu wrote: > > I've made my change to set the brightness level directly in the > > driver, but the > > OSD doesn't show correctly correspond to the level value. The brightness > > shows > > OK in /sys/class/led/xxxx/brighness but the OSD always shows level 0. I > > thought > > GNOME should read the brightness from /sys before showing OSD? > > Sorry for the late response. > > There is a special mechanism to report that the HW changed the > brightness. This works using the "brightness_hw_changed" sysfs > attribute. So you will need to set the LED_BRIGHT_HW_CHANGED flag on > the LED and then call led_classdev_notify_brightness_hw_changed to make > it work. > > Userspace should correctly show the OSD when this is done.
This makes sense. Userspace can't be aware of every platforms sys files, so there needs to be a common mechanism. LED_BRIGHT_HW_CHANGED makes sense. -- Darren Hart VMware Open Source Technology Center
