On 2018-05-01 00:54, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me
know.
Hi Greg,
This is a dependency patch to the actual fix ,
[PATCH 2/2 - linux-stable-4.4] ath10k: rebuild crypto header in rx data
frames.
We would like both these patches to be upstreamed to 4.4 together.
As mentioned in cover, These patches depends on 3 other mac80211 patches
so the below mac80211 commits needs to be picked first in the same order
and then apply this patchset.
f980ebc058c2 : mac80211: allow not sending MIC up from driver for HW
crypto
f631a77ba920 : mac80211: allow same PN for AMSDU sub-frames
cef0acd4d7d4 : mac80211: Add RX flag to indicate ICV stripped
These patches should be applied in that order(commit f980ebc058c2 first)
and they should apply cleanly with --3-way merge.
Kindly revert if you face any issues.
Thanks,
Sriram.R
------------------
From: Vasanthakumar Thiagarajan <[email protected]>
commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.
Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
rx_hdr_status is not padded to align in 4-byte boundary. Define a
new hw_params field to handle different alignment behaviour between
different hw. This patch fixes improper retrieval of rfc1042 header
with QCA4019. This patch along with "ath10k: Properly remove padding
from the start of rx payload" will fix traffic failure in ethernet
decap mode for QCA4019.
Signed-off-by: Vasanthakumar Thiagarajan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sriram R <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 8 ++++++++
drivers/net/wireless/ath/ath10k/core.h | 4 ++++
2 files changed, 12 insertions(+)
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -67,6 +67,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA988X_BOARD_DATA_SZ,
.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 4,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -85,6 +86,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 4,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -103,6 +105,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 4,
},
{
.id = QCA6174_HW_3_0_VERSION,
@@ -121,6 +124,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 4,
},
{
.id = QCA6174_HW_3_2_VERSION,
@@ -140,6 +144,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 4,
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -159,6 +164,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA99X0_BOARD_DATA_SZ,
.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 1,
},
{
.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -177,6 +183,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 4,
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -195,6 +202,7 @@ static const struct ath10k_hw_params ath
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
},
+ .decap_align_bytes = 4,
},
};
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -670,6 +670,10 @@ struct ath10k {
size_t board_size;
size_t board_ext_size;
} fw;
+
+ /* Number of bytes used for alignment in rx_hdr_status */
+ int decap_align_bytes;
+
} hw_params;
const struct firmware *board;
