Correct misaligned indentation and remove extraneous spaces.
Signed-off-by: Joey Pabalinas <joeypabali...@gmail.com>
---
drivers/tty/nozomi.c | 74 ++++++++++++++++++++++----------------------
1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index f26bf1d1e9ee0e74eb..0fcb4db721d2a42f08 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -100,45 +100,45 @@ do {
\
/* Size of tmp send buffer to card */
#define SEND_BUF_MAX 1024
#define RECEIVE_BUF_MAX 4
-#define R_IIR 0x0000 /* Interrupt Identity Register */
-#define R_FCR 0x0000 /* Flow Control Register */
-#define R_IER 0x0004 /* Interrupt Enable Register */
+#define R_IIR 0x0000 /* Interrupt Identity Register */
+#define R_FCR 0x0000 /* Flow Control Register */
+#define R_IER 0x0004 /* Interrupt Enable Register */
#define NOZOMI_CONFIG_MAGIC 0xEFEFFEFE
#define TOGGLE_VALID 0x0000
/* Definition of interrupt tokens */
-#define MDM_DL1 0x0001
-#define MDM_UL1 0x0002
-#define MDM_DL2 0x0004
-#define MDM_UL2 0x0008
-#define DIAG_DL1 0x0010
-#define DIAG_DL2 0x0020
-#define DIAG_UL 0x0040
-#define APP1_DL 0x0080
-#define APP1_UL 0x0100
-#define APP2_DL 0x0200
-#define APP2_UL 0x0400
-#define CTRL_DL 0x0800
-#define CTRL_UL 0x1000
-#define RESET 0x8000
+#define MDM_DL1 0x0001
+#define MDM_UL1 0x0002
+#define MDM_DL2 0x0004
+#define MDM_UL2 0x0008
+#define DIAG_DL1 0x0010
+#define DIAG_DL2 0x0020
+#define DIAG_UL 0x0040
+#define APP1_DL 0x0080
+#define APP1_UL 0x0100
+#define APP2_DL 0x0200
+#define APP2_UL 0x0400
+#define CTRL_DL 0x0800
+#define CTRL_UL 0x1000
+#define RESET 0x8000
-#define MDM_DL (MDM_DL1 | MDM_DL2)
-#define MDM_UL (MDM_UL1 | MDM_UL2)
-#define DIAG_DL (DIAG_DL1 | DIAG_DL2)
+#define MDM_DL (MDM_DL1 | MDM_DL2)
+#define MDM_UL (MDM_UL1 | MDM_UL2)
+#define DIAG_DL (DIAG_DL1 | DIAG_DL2)
/* modem signal definition */
-#define CTRL_DSR 0x0001
-#define CTRL_DCD 0x0002
-#define CTRL_RI 0x0004
-#define CTRL_CTS 0x0008
+#define CTRL_DSR 0x0001
+#define CTRL_DCD 0x0002
+#define CTRL_RI 0x0004
+#define CTRL_CTS 0x0008
-#define CTRL_DTR 0x0001
-#define CTRL_RTS 0x0002
+#define CTRL_DTR 0x0001
+#define CTRL_RTS 0x0002
#define MAX_PORT 4
#define NOZOMI_MAX_PORTS 5
#define NOZOMI_MAX_CARDS (NTTY_TTY_MAXMINORS / MAX_PORT)
@@ -363,11 +363,11 @@ struct nozomi {
struct buffer {
u32 size; /* size is the length of the data buffer */
u8 *data;
} __attribute__ ((packed));
-/* Global variables */
+/* Global variables */
static const struct pci_device_id nozomi_pci_tbl[] = {
{PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */
{},
};
@@ -1684,16 +1684,16 @@ static int ntty_tiocmget(struct tty_struct *tty)
const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
const struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
/* Note: these could change under us but it is not clear this
matters if so */
- return (ctrl_ul->RTS ? TIOCM_RTS : 0) |
- (ctrl_ul->DTR ? TIOCM_DTR : 0) |
- (ctrl_dl->DCD ? TIOCM_CAR : 0) |
- (ctrl_dl->RI ? TIOCM_RNG : 0) |
- (ctrl_dl->DSR ? TIOCM_DSR : 0) |
- (ctrl_dl->CTS ? TIOCM_CTS : 0);
+ return (ctrl_ul->RTS ? TIOCM_RTS : 0)
+ | (ctrl_ul->DTR ? TIOCM_DTR : 0)
+ | (ctrl_dl->DCD ? TIOCM_CAR : 0)
+ | (ctrl_dl->RI ? TIOCM_RNG : 0)
+ | (ctrl_dl->DSR ? TIOCM_DSR : 0)
+ | (ctrl_dl->CTS ? TIOCM_CTS : 0);
}
/* Sets io controls parameters */
static int ntty_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
@@ -1720,14 +1720,14 @@ static int ntty_cflags_changed(struct port *port,
unsigned long flags,
struct async_icount *cprev)
{
const struct async_icount cnow = port->tty_icount;
int ret;
- ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
- ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
- ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
- ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts));
+ ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng))
+ || ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr))
+ || ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd))
+ || ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts));
*cprev = cnow;
return ret;
}
--
2.17.0.rc1.35.g90bbd502d54fe92035.dirty
