On Freitag, 23. März 2018 15:48:48 CEST Sricharan R wrote: > Add the common parts for the dk04 boards. > > Reviewed-by: Abhishek Sahu <abs...@codeaurora.org> > Signed-off-by: Sricharan R <sricha...@codeaurora.org> > --- > arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 115 > ++++++++++++++++++++++++++ > arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- > 2 files changed, 116 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
The no-map reserved-memory for tz and smem are missing. Linux doesn't have
control over these regions and they are placed in the middle of the ram before
Linux even starts. And u-boot is also not adding these ranges automatically.
reserved-memory {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
smem@87e00000 {
reg = <0x87e00000 0x080000>;
no-map;
};
tz@87e80000 {
reg = <0x87e80000 0x180000>;
no-map;
};
};
This can either (depending on HW/SW configuration) lead to a failed boot [1]
or to runtime crashes like:
root@OpenWrt:/# /tmp/memory-allocator-test
main 0
[ 571.758058] Unhandled fault: imprecise external abort (0xc06) at
0x01715ff8
[ 571.758099] pgd = cebec000
[ 571.763826] [01715ff8] *pgd=8e7fa835, *pte=87e7f75f, *ppte=87e7fc7f
Bus error
I would not know how to disable QSEE on these boards and thus would assume
that it should be part of this dtsi.
Kind regards,
Sven
[1] https://www.spinics.net/lists/linux-arm-msm/msg21536.html
signature.asc
Description: This is a digitally signed message part.
