Hi,

Il 12/04/2018 01:09, Paul Kocialkowski ha scritto:
Hi,

Le jeudi 12 avril 2018 à 00:22 +0200, Giulio Benetti a écrit :
Hi,

Il 10/04/2018 23:31, Paul Kocialkowski ha scritto:
This adds the pins definition for RGB666 LCD panels on the A20. It
was
imported from the A33 definition, that concernes the same set of
pins.

Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
---
   arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
   1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi
b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..f46af8675cfa 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -781,6 +781,14 @@
                                function = "ir1";
                        };
+ lcd_rgb666_pins: lcd_rgb666@0 {

I point you to this Thread and back:
https://lists.freedesktop.org/archives/dri-devel/2018-March/170688.htm
l

I did the same for rgb888, so good part is discussed.

IMHO I would:
- call lcd0_rgb666_pins, since this is for LCD0 interface
- same as above, call lcd0-rgb666, take care about using "-" instad
of
"_" that can cause DTC warnings.
- remove @0 since only this set can achieve LCD0 RGB666, and I
    don't think there will be other combinations.

I even responded to that discussion but overlooked these aspects when
crafting this patch. Thanks for the summary :)

You're welcome, I've forgotten you've been involved discussing
that patch so i've pointed you something yours :)
Anyway it should help.

Best regards

--
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642


Kind regards

--
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642


+                               pins = "PD2", "PD3", "PD4", "PD5",
"PD6", "PD7",
+                                      "PD10", "PD11", "PD12",
"PD13", "PD14", "PD15",
+                                      "PD18", "PD19", "PD20",
"PD21", "PD22", "PD23",
+                                      "PD24", "PD25", "PD26",
"PD27";
+                               function = "lcd0";
+                       };
+
                        mmc0_pins_a: mmc0@0 {
                                pins = "PF0", "PF1", "PF2",
                                       "PF3", "PF4", "PF5";




Reply via email to