2018-04-03 17:18 GMT+09:00 Philipp Zabel <p.za...@pengutronix.de>:
> On Fri, 2018-03-30 at 18:44 +0900, Kunihiko Hayashi wrote:
>> Add reset lines for SATA controller on UniPhier SoCs.
>> This adds support for Pro4 and PXs3 in addition to PXs2.
>>
>> And this changes the ID of the reset line for SATA-PHY on PXs2.
>> Since some SoCs have two controller instances with a common PHY, this moves
>> the ID of SATA-PHY for consistency.
>>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
>> ---
>> drivers/reset/reset-uniphier.c | 8 +++++++-
>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
>> index 55ae0f1..90e6caf 100644
>> --- a/drivers/reset/reset-uniphier.c
>> +++ b/drivers/reset/reset-uniphier.c
>> @@ -63,6 +63,9 @@ static const struct uniphier_reset_data
>> uniphier_pro4_sys_reset_data[] = {
>> UNIPHIER_RESETX(12, 0x2000, 6), /* GIO (Ether, SATA, USB3) */
>> UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */
>> UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */
>> + UNIPHIER_RESETX(28, 0x2000, 18), /* SATA0 */
>> + UNIPHIER_RESETX(29, 0x2004, 18), /* SATA1 */
>> + UNIPHIER_RESETX(30, 0x2000, 19), /* SATA-PHY */
>> UNIPHIER_RESETX(40, 0x2000, 13), /* AIO */
>> UNIPHIER_RESET_END,
>> };
>> @@ -90,7 +93,7 @@ static const struct uniphier_reset_data
>> uniphier_pxs2_sys_reset_data[] = {
>> UNIPHIER_RESETX(20, 0x2014, 5), /* USB31-PHY0 */
>> UNIPHIER_RESETX(21, 0x2014, 1), /* USB31-PHY1 */
>> UNIPHIER_RESETX(28, 0x2014, 12), /* SATA */
>> - UNIPHIER_RESET(29, 0x2014, 8), /* SATA-PHY (active high) */
>> + UNIPHIER_RESET(30, 0x2014, 8), /* SATA-PHY (active high) */
>
> This is a backwards incompatible change.
> There is no DT in use that relies on this being 29 ?
Right. No user for this reset line ever.
--
Best Regards
Masahiro Yamada
