On 02/23/2018 11:16 AM, [email protected] wrote:
> From: Sean Wang <[email protected]>
> 
> Since those LEDs are parts of PMIC MT6323, it is reasonable to merge
> those LEDs node definition back into mt6323.dtsi. This way can improve
> the reusability of those nodes among different boards with the same PMIC.
> 
> Signed-off-by: Sean Wang <[email protected]>
> Cc: Lee Jones <[email protected]>
> ---
>  arch/arm/boot/dts/mt6323.dtsi                 | 26 ++++++++++++++++++++++++-
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 28 
> ---------------------------
>  2 files changed, 25 insertions(+), 29 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
> index 7c783d6..44c5642 100644
> --- a/arch/arm/boot/dts/mt6323.dtsi
> +++ b/arch/arm/boot/dts/mt6323.dtsi
> @@ -1,5 +1,5 @@
>  /*
> - * Copyright (c) 2017 MediaTek Inc.
> + * Copyright (c) 2017-2018 MediaTek Inc.
>   * Author: John Crispin <[email protected]>
>   *      Sean Wang <[email protected]>
>   * This program is free software; you can redistribute it and/or modify
> @@ -237,5 +237,29 @@
>                               regulator-enable-ramp-delay = <216>;
>                       };
>               };
> +
> +             leds {
> +                     compatible = "mediatek,mt6323-led";
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     led@0 {
> +                             reg = <0>;
> +                             label = "mt6323:isink:green";
> +                             default-state = "off";
> +                     };
> +
> +                     led@1 {
> +                             reg = <1>;
> +                             label = "mt6323:isink:red";
> +                             default-state = "off";
> +                     };
> +
> +                     led@2 {
> +                             reg = <2>;
> +                             label = "mt6323:isink:blue";
> +                             default-state = "off";
> +                     };
> +             };

The color of the leds are defined by the board and not by the PMIC. So as long
as you don't have any good arguments, I tend not to merge this one.

Regards,
Matthias

>       };
>  };
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts 
> b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 75e61c4..767b225 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -483,34 +483,6 @@
>       status = "okay";
>  };
>  
> -&pwrap {
> -     mt6323 {
> -             mt6323led: led {
> -                     compatible = "mediatek,mt6323-led";
> -                     #address-cells = <1>;
> -                     #size-cells = <0>;
> -
> -                     led@0 {
> -                             reg = <0>;
> -                             label = "bpi-r2:isink:green";
> -                             default-state = "off";
> -                     };
> -
> -                     led@1 {
> -                             reg = <1>;
> -                             label = "bpi-r2:isink:red";
> -                             default-state = "off";
> -                     };
> -
> -                     led@2 {
> -                             reg = <2>;
> -                             label = "bpi-r2:isink:blue";
> -                             default-state = "off";
> -                     };
> -             };
> -     };
> -};
> -
>  &spi0 {
>       pinctrl-names = "default";
>       pinctrl-0 = <&spi0_pins_a>;
> 

Reply via email to