[PATCH] phy: lpc18xx-usb-otg: error handling in lpc18xx_usb_otg_phy_power_on()

[Alexey Khoroshilov]

If regmap_update_bits() fails in lpc18xx_usb_otg_phy_power_on(),
lpc->clk is left enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshi...@ispras.ru>
---
 drivers/phy/phy-lpc18xx-usb-otg.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/phy-lpc18xx-usb-otg.c 
b/drivers/phy/phy-lpc18xx-usb-otg.c
index 3b7a71eb5b7e..7de280a45421 100644
--- a/drivers/phy/phy-lpc18xx-usb-otg.c
+++ b/drivers/phy/phy-lpc18xx-usb-otg.c
@@ -60,8 +60,14 @@ static int lpc18xx_usb_otg_phy_power_on(struct phy *phy)
                return ret;
 
        /* The bit in CREG is cleared to enable the PHY */
-       return regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
+       ret = regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
                                  LPC18XX_CREG_CREG0_USB0PHY, 0);
+       if (ret) {
+               clk_disable(lpc->clk);
+               return ret;
+       }
+
+       return 0;
 }
 
 static int lpc18xx_usb_otg_phy_power_off(struct phy *phy)
-- 
2.7.4