From: Denis Osterland <denis.osterl...@diehl.com>
After successful
sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
sr will be 0.
As a result
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
sr & ~ISL1208_REG_SR_WRTC);
is equal to
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, 0);
which clears all flags in SR.
Add an additional read of SR, to have value of SR in sr again.
Signed-off-by: Denis Osterland <denis.osterl...@diehl.com>
Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
---
drivers/rtc/rtc-isl1208.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 8dd299c6a1f33..c8b4953482296 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -459,6 +459,11 @@ isl1208_i2c_set_time(struct i2c_client *client, struct
rtc_time const *tm)
}
/* clear WRTC again */
+ sr = isl1208_i2c_get_sr(client);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+ return sr;
+ }
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
sr & ~ISL1208_REG_SR_WRTC);
if (sr < 0) {
--
2.11.0
