On 2018/01/18 15:50, Benjamin Poirier wrote:
> It was reported that emulated e1000e devices in vmware esxi 6.5 Build
> 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
> overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
> e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
> on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
> icr=0x80000004 (_INT_ASSERTED | _OTHER) in the same situation.
>
> Some experimentation showed that this flaw in vmware e1000e emulation can
> be worked around by not setting Other in EIAC. This is how it was before
> 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
vmware folks, please comment.
