On Mon, Jan 01, 2018 at 03:33:41PM +0100, Paul Cercueil wrote:
> This simple driver handles the IRQ chip of the TCU
> (Timer Counter Unit) of the JZ47xx Ingenic SoCs.
>
> Signed-off-by: Paul Cercueil <p...@crapouillou.net>
> ---
> .../bindings/interrupt-controller/ingenic,tcu.txt | 32 +++++
> drivers/irqchip/Kconfig | 6 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-ingenic-tcu.c | 151
> +++++++++++++++++++++
> 4 files changed, 190 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> create mode 100644 drivers/irqchip/irq-ingenic-tcu.c
>
> v2: Use SPDX identifier for the license
> Make KConfig option select CONFIG_IRQ_DOMAIN since we depend on it
>
> diff --git
> a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..a3e6318f8461
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> @@ -0,0 +1,32 @@
> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
> + * ingenic,jz4740-tcu-intc
> + * ingenic,jz4770-tcu-intc
> + * ingenic,jz4780-tcu-intc
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 1.
> +- interrupt-parent : phandle of the interrupt controller.
> +- interrupts : Specifies the interrupt the controller is connected to.
> +
> +Example:
> +
> +/ {
> + regmap {
regmap is a Linuxism.
> + compatible = "simple-mfd", "syscon";
Need a specific compatible string here. Neither of these are valid by
themselves.
> + reg = <0x10002000 0x1000>;
> +
> + tcu: interrupt-controller {
The TCU is only an interrupt controller?
> + compatible = "ingenic,jz4740-tcu-intc";
Is there a register range associated with this block? If so, add a reg
property even if regmap doesn't need it.
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <15>;
> + };
> + };
> +};
