Hi Viresh,
On 12/20/2017 9:06 AM, Viresh Kumar wrote:
> On 19-12-17, 21:24, Sricharan R wrote:
>> From: Stephen Boyd <sb...@codeaurora.org>
>>
>> Register a cpufreq-generic device whenever we detect that a
>> "qcom,krait" compatible CPU is present in DT.
>>
>> Cc: <devicet...@vger.kernel.org>
>> [Sricharan: updated to use dev_pm_opp_set_prop_name]
>> Signed-off-by: Sricharan R <sricha...@codeaurora.org>
>> Signed-off-by: Stephen Boyd <sb...@codeaurora.org>
>> ---
>> drivers/cpufreq/Kconfig.arm | 9 ++
>> drivers/cpufreq/Makefile | 1 +
>> drivers/cpufreq/cpufreq-dt-platdev.c | 3 +-
>> drivers/cpufreq/qcom-cpufreq.c | 171
>> +++++++++++++++++++++++++++++++++++
>> 4 files changed, 183 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/cpufreq/qcom-cpufreq.c
>>
>> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
>> index bdce448..60f28e7 100644
>> --- a/drivers/cpufreq/Kconfig.arm
>> +++ b/drivers/cpufreq/Kconfig.arm
>> @@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ
>> depends on ARCH_OMAP2PLUS
>> default ARCH_OMAP2PLUS
>>
>> +config ARM_QCOM_CPUFREQ
>> + tristate "Qualcomm based"
>
> Qualcomm based ... ? You want to add something after this ?
>
Hmm, got truncated. Will add a proper one.
> And why tristate ? Do you really want to build a module for this ?
>
Given that cpufreq-dt that registers the driver already supports module,
don't think this needs to be a module. So will make it a bool.
>> + depends on ARCH_QCOM
>> + select PM_OPP
>> + help
>> + This adds the CPUFreq driver for Qualcomm SoC based boards.
>> +
>> + If in doubt, say N.
>> +
>> config ARM_S3C_CPUFREQ
>> bool
>> help
>> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
>> index 812f9e0..1496464 100644
>> --- a/drivers/cpufreq/Makefile
>> +++ b/drivers/cpufreq/Makefile
>> @@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o
>> obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
>> obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
>> obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
>> +obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o
>> obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
>> obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
>> obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
>> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c
>> b/drivers/cpufreq/cpufreq-dt-platdev.c
>> index ecc56e2..032ac4f 100644
>> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
>> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
>> @@ -118,7 +118,7 @@
>> { .compatible = "ti,am33xx", },
>> { .compatible = "ti,am43", },
>> { .compatible = "ti,dra7", },
>> -
>
> Keep this blank line as is..
>
ok
>> + { .compatible = "qcom,ipq8064", },
>
> And add another one here.
>
ok
>> { }
>> };
>>
>> @@ -157,6 +157,7 @@ static int __init cpufreq_dt_platdev_init(void)
>>
>> create_pdev:
>> of_node_put(np);
>> +
>
> Remove this.
>
ok
>> return PTR_ERR_OR_ZERO(platform_device_register_data(NULL, "cpufreq-dt",
>> -1, data,
>> sizeof(struct cpufreq_dt_platform_data)));
>> diff --git a/drivers/cpufreq/qcom-cpufreq.c b/drivers/cpufreq/qcom-cpufreq.c
>> new file mode 100644
>> index 0000000..3e5583d
>> --- /dev/null
>> +++ b/drivers/cpufreq/qcom-cpufreq.c
>> @@ -0,0 +1,171 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
>> +
>> +#include <linux/cpu.h>
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_opp.h>
>> +#include <linux/slab.h>
>> +#include "cpufreq-dt.h"
>> +
>> +static void __init get_krait_bin_format_a(int *speed, int *pvs, int
>> *pvs_ver)
>> +{
>> + void __iomem *base;
>> + u32 pte_efuse;
>> +
>> + *speed = *pvs = *pvs_ver = 0;
>> +
>> + base = ioremap(0x007000c0, 4);
>> + if (!base) {
>> + pr_warn("Unable to read efuse data. Defaulting to 0!\n");
>> + return;
>> + }
>> +
>> + pte_efuse = readl_relaxed(base);
>> + iounmap(base);
>> +
>> + *speed = pte_efuse & 0xf;
>> + if (*speed == 0xf)
>> + *speed = (pte_efuse >> 4) & 0xf;
>> +
>> + if (*speed == 0xf) {
>> + *speed = 0;
>> + pr_warn("Speed bin: Defaulting to %d\n", *speed);
>> + } else {
>> + pr_info("Speed bin: %d\n", *speed);
>> + }
>> +
>> + *pvs = (pte_efuse >> 10) & 0x7;
>> + if (*pvs == 0x7)
>> + *pvs = (pte_efuse >> 13) & 0x7;
>> +
>> + if (*pvs == 0x7) {
>> + *pvs = 0;
>> + pr_warn("PVS bin: Defaulting to %d\n", *pvs);
>> + } else {
>> + pr_info("PVS bin: %d\n", *pvs);
>> + }
>> +}
>> +
>> +static void __init get_krait_bin_format_b(int *speed, int *pvs, int
>> *pvs_ver)
>> +{
>> + u32 pte_efuse, redundant_sel;
>> + void __iomem *base;
>> +
>> + *speed = 0;
>> + *pvs = 0;
>> + *pvs_ver = 0;
>> +
>> + base = ioremap(0xfc4b80b0, 8);
>> + if (!base) {
>> + pr_warn("Unable to read efuse data. Defaulting to 0!\n");
>> + return;
>> + }
>> +
>> + pte_efuse = readl_relaxed(base);
>> + redundant_sel = (pte_efuse >> 24) & 0x7;
>> + *speed = pte_efuse & 0x7;
>> + /* 4 bits of PVS are in efuse register bits 31, 8-6. */
>> + *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
>> + *pvs_ver = (pte_efuse >> 4) & 0x3;
>> +
>> + switch (redundant_sel) {
>> + case 1:
>> + *speed = (pte_efuse >> 27) & 0xf;
>> + break;
>> + case 2:
>> + *pvs = (pte_efuse >> 27) & 0xf;
>> + break;
>> + }
>> +
>> + /* Check SPEED_BIN_BLOW_STATUS */
>> + if (pte_efuse & BIT(3)) {
>> + pr_info("Speed bin: %d\n", *speed);
>> + } else {
>> + pr_warn("Speed bin not set. Defaulting to 0!\n");
>> + *speed = 0;
>> + }
>> +
>> + /* Check PVS_BLOW_STATUS */
>> + pte_efuse = readl_relaxed(base + 0x4) & BIT(21);
>> + if (pte_efuse) {
>> + pr_info("PVS bin: %d\n", *pvs);
>> + } else {
>> + pr_warn("PVS bin not set. Defaulting to 0!\n");
>> + *pvs = 0;
>> + }
>> +
>> + pr_info("PVS version: %d\n", *pvs_ver);
>> + iounmap(base);
>> +}
>> +
>> +static int __init qcom_cpufreq_populate_opps(void)
>> +{
>> + int speed, pvs, pvs_ver;
>> + struct device_node *np;
>> + struct device *dev;
>> + int cpu = 0;
>> + char pvs_name[] = "speedXX-pvsXX-vXX";
>> +
>> + np = of_find_node_by_name(NULL, "qcom,pvs");
>> + if (!np)
>> + return -ENODEV;
>> +
>> + if (of_property_read_bool(np, "qcom,pvs-format-a"))
>> + get_krait_bin_format_a(&speed, &pvs, &pvs_ver);
>> + else if (of_property_read_bool(np, "qcom,pvs-format-b"))
>> + get_krait_bin_format_b(&speed, &pvs, &pvs_ver);
>> + else
>> + return -ENODEV;
>> +
>> + snprintf(pvs_name, sizeof(pvs_name), "speed%d-pvs%d-v%d",
>> + speed, pvs, pvs_ver);
>> +
>> + for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
>> + dev = get_cpu_device(cpu);
>> + if (!dev)
>> + return -ENODEV;
>> +
>> + if (IS_ERR(dev_pm_opp_set_prop_name(dev, pvs_name)))
>> + pr_warn("failed to add OPP name %s\n", pvs_name);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int __init qcom_cpufreq_driver_init(void)
>> +{
>> + struct device *cpu_dev;
>> + struct device_node *np;
>> + int ret;
>> +
>> + cpu_dev = get_cpu_device(0);
>> + if (!cpu_dev)
>> + return -ENODEV;
>> +
>> + np = of_node_get(cpu_dev->of_node);
>> + if (!np)
>> + return -ENOENT;
>> +
>> + if (!of_device_is_compatible(np, "qcom,krait")) {
>> + of_node_put(np);
>> + return -ENODEV;
>> + }
>> + of_node_put(np);
>> +
>> + ret = qcom_cpufreq_populate_opps();
>> + if (ret)
>> + return ret;
>> +
>> + return PTR_ERR(platform_device_register_simple("cpufreq-dt",
>> + -1, NULL, 0));
>> +}
>> +module_init(qcom_cpufreq_driver_init);
>
> As there is no module exit, it doesn't make sense to keep this as
> tristate.
>
ok
> Looks mostly fine now other than these minor nits.
>
Ok, Thanks for the review. Will wait on feedback for rest of the patches
and repost with these fixed.
Regards,
Sricharan
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of
Code Aurora Forum, hosted by The Linux Foundation
