From: Changbin Du <changbin...@intel.com> The build message for fdimage/isoimage are pretty unstructured. The raw shell command blocks are printed. We can improve them as regular build system messages. Besides, writing commands in shell script is much more easier than in a Makefile.
See Ingo's suggestion here https://lkml.org/lkml/2017/10/31/124. This patch fact out the commands used for fdimage/isoimage generation from arch/x86/boot/Makefile to new script arch/x86/boot/genimage.sh. Then add a new kbuild command 'genimage' which invokes the new script. All fdimages/isoimage now is generated by call to 'genimage' with different parameters. Now 'make isoimage' becomes: ... Kernel: arch/x86/boot/bzImage is ready (#30) GENIMAGE arch/x86/boot/image.iso Size of boot image is 4 sectors -> No emulation 15.37% done, estimate finish Sun Nov 5 23:36:57 2017 30.68% done, estimate finish Sun Nov 5 23:36:57 2017 46.04% done, estimate finish Sun Nov 5 23:36:57 2017 61.35% done, estimate finish Sun Nov 5 23:36:57 2017 76.69% done, estimate finish Sun Nov 5 23:36:57 2017 92.00% done, estimate finish Sun Nov 5 23:36:57 2017 Total translation table size: 2048 Total rockridge attributes bytes: 659 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used 0 32608 extents written (63 MB) Kernel: arch/x86/boot/image.iso is ready Before: Kernel: arch/x86/boot/bzImage is ready (#63) rm -rf arch/x86/boot/isoimage mkdir arch/x86/boot/isoimage for i in lib lib64 share end ; do \ if [ -f /usr/$i/syslinux/isolinux.bin ] ; then \ cp /usr/$i/syslinux/isolinux.bin arch/x86/boot/isoimage ; \ if [ -f /usr/$i/syslinux/ldlinux.c32 ]; then \ cp /usr/$i/syslinux/ldlinux.c32 arch/x86/boot/isoimage ; \ fi ; \ break ; \ fi ; \ if [ $i = end ] ; then exit 1 ; fi ; \ done ... Suggested-by: Ingo Molnar <mi...@kernel.org> Signed-off-by: Changbin Du <changbin...@intel.com> Cc: Masahiro Yamada <yamada.masah...@socionext.com> --- arch/x86/boot/Makefile | 59 +++++--------------------- arch/x86/boot/genimage.sh | 105 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+), 48 deletions(-) create mode 100644 arch/x86/boot/genimage.sh diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index d88a2fd..9b5adae 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -123,63 +123,26 @@ image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) $(obj)/mtools.conf: $(src)/mtools.conf.in sed -e 's|@OBJ@|$(obj)|g' < $< > $@ +quiet_cmd_genimage = GENIMAGE $3 +cmd_genimage = sh $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \ + $(obj)/mtools.conf '$(image_cmdline)' $(FDINITRD) + # This requires write access to /dev/fd0 bzdisk: $(obj)/bzImage $(obj)/mtools.conf - MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync - syslinux /dev/fd0 ; sync - echo '$(image_cmdline)' | \ - MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ - fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage a:linux ; sync + $(call cmd,genimage,bzdisk,/dev/fd0) # These require being root or having syslinux 2.02 or higher installed fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf - dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 - MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync - syslinux $(obj)/fdimage ; sync - echo '$(image_cmdline)' | \ - MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ - fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage v:linux ; sync + $(call cmd,genimage,fdimage144,$(obj)/fdimage) + @$(kecho) 'Kernel: $(obj)/fdimage is ready' fdimage288: $(obj)/bzImage $(obj)/mtools.conf - dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 - MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync - syslinux $(obj)/fdimage ; sync - echo '$(image_cmdline)' | \ - MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ - fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage w:linux ; sync + $(call cmd,genimage,fdimage288,$(obj)/fdimage) + @$(kecho) 'Kernel: $(obj)/fdimage is ready' isoimage: $(obj)/bzImage - -rm -rf $(obj)/isoimage - mkdir $(obj)/isoimage - for i in lib lib64 share end ; do \ - if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \ - cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \ - if [ -f /usr/$$i/syslinux/ldlinux.c32 ]; then \ - cp /usr/$$i/syslinux/ldlinux.c32 $(obj)/isoimage ; \ - fi ; \ - break ; \ - fi ; \ - if [ $$i = end ] ; then exit 1 ; fi ; \ - done - cp $(obj)/bzImage $(obj)/isoimage/linux - echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg - if [ -f '$(FDINITRD)' ] ; then \ - cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ - fi - mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ - -no-emul-boot -boot-load-size 4 -boot-info-table \ - $(obj)/isoimage - isohybrid $(obj)/image.iso 2>/dev/null || true - rm -rf $(obj)/isoimage + $(call cmd,genimage,isoimage,$(obj)/image.iso) + @$(kecho) 'Kernel: $(obj)/image.iso is ready' bzlilo: $(obj)/bzImage if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi diff --git a/arch/x86/boot/genimage.sh b/arch/x86/boot/genimage.sh new file mode 100644 index 0000000..75a9de1 --- /dev/null +++ b/arch/x86/boot/genimage.sh @@ -0,0 +1,105 @@ +#!/bin/sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2017 by Changbin Du <changbin...@intel.com> +# +# Adapted from code in arch/x86/boot/Makefile by H. Peter Anvin and others +# +# "make fdimage/fdimage144/fdimage288/isoimage" script for x86 architecture +# +# Arguments: +# $1 - fdimage format +# $2 - target image file +# $3 - kernel bzImage file +# $4 - mtool configuration file +# $5 - kernel cmdline +# $6 - inird image file +# + +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo "" 1>&2 + exit 1 + fi +} + + +export MTOOLSRC=$4 +FIMAGE=$2 +FBZIMAGE=$3 +KCMDLINE=$5 +FDINITRD=$6 + +# Make sure the files actually exist +verify "$FBZIMAGE" +verify "$MTOOLSRC" + +genbzdisk() { + mformat a: + syslinux $FIMAGE + echo "$KCMDLINE" | mcopy - a:syslinux.cfg + if [ -f "$FDINITRD" ] ; then + mcopy "$FDINITRD" a:initrd.img + fi + mcopy $FBZIMAGE a:linux +} + +genfdimage144() { + dd if=/dev/zero of=$FIMAGE bs=1024 count=1440 + mformat v: + syslinux $FIMAGE + echo "$KCMDLINE" | mcopy - v:syslinux.cfg + if [ -f "$FDINITRD" ] ; then + mcopy "$FDINITRD" v:initrd.img + fi + mcopy $FBZIMAGE v:linux +} + +genfdimage288() { + dd if=/dev/zero of=$FIMAGE bs=1024 count=2880 + mformat w: + syslinux $FIMAGE + echo "$KCMDLINE" | mcopy - W:syslinux.cfg + if [ -f "$FDINITRD" ] ; then + mcopy "$FDINITRD" w:initrd.img + fi + mcopy $FBZIMAGE w:linux +} + +genisoimage() { + tmp_dir=`dirname $FIMAGE`/isoimage + rm -rf $tmp_dir + mkdir $tmp_dir + for i in lib lib64 share end ; do + if [ -f /usr/$i/syslinux/isolinux.bin ] ; then + cp /usr/$i/syslinux/isolinux.bin $tmp_dir + if [ -f /usr/$i/syslinux/ldlinux.c32 ]; then + cp /usr/$i/syslinux/ldlinux.c32 $tmp_dir + fi + break + fi + if [ $i = end ] ; then exit 1 ; fi ; + done + cp $FBZIMAGE $tmp_dir/linux + echo "$KCMDLINE" > $tmp_dir/isolinux.cfg + if [ -f "$FDINITRD" ] ; then + cp "$FDINITRD" $tmp_dir/initrd.img + fi + mkisofs -J -r -o $FIMAGE -b isolinux.bin -c boot.cat \ + -no-emul-boot -boot-load-size 4 -boot-info-table $tmp_dir + isohybrid $FIMAGE 2>/dev/null || true + rm -rf $tmp_dir +} + +case $1 in + bzdisk) genbzdisk;; + fdimage144) genfdimage144;; + fdimage288) genfdimage288;; + isoimage) genisoimage;; + *) echo 'Unknown image format'; exit 1; +esac -- 2.7.4
