On Wed 09 Aug 14:50 PDT 2017, Stephen Boyd wrote: > On 08/09/2017 01:10 PM, Bjorn Andersson wrote: > > On msm8916 and msm8996 boards a secure io-write is used to write the > > magic for selecting "download mode", specify this address in the > > DeviceTree. > > > > Note that qcom_scm.download_mode=1 must be specified on the kernel > > command line for the kernel to attempt selecting download mode. > > > > Signed-off-by: Bjorn Andersson <[email protected]> > > --- > > arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 ++ > > arch/arm64/boot/dts/qcom/msm8996.dtsi | 7 +++++++ > > 2 files changed, 9 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi > > b/arch/arm64/boot/dts/qcom/msm8916.dtsi > > index 039991f80831..b7197f2e7209 100644 > > --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi > > +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi > > @@ -241,6 +241,8 @@ > > clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc > > GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; > > clock-names = "core", "bus", "iface"; > > #reset-cells = <1>; > > + > > + qcom,dload-mode = <&tcsr>; > > }; > > }; > > > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi > > b/arch/arm64/boot/dts/qcom/msm8996.dtsi > > index 8f085716e258..2eee6a33f22b 100644 > > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > > @@ -261,6 +261,8 @@ > > firmware { > > scm { > > compatible = "qcom,scm-msm8996"; > > + > > + qcom,dload-mode = <&tcsr>; > > We don't need an offset into tcsr? >
Of course we do, this only worked with my previous (and incorrect) tcsr definition - not the one I ended up including in the patch. Thanks, Bjorn
