Hi, On Monday 31 July 2017 12:04 PM, Varadarajan Narayanan wrote: > v6: > Added 'Reviewed-by: Vivek Gautam <vivek.gau...@codeaurora.org>' and fixed > white space issues as mentioned by Vivek. > phy: qcom-qmp: Fix phy pipe clock name > dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
merged the 1st four patches (phy patches) of the series to linux-phy -next. Thanks Kishon > > v5: > dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 > Renamed phy_phy clock as common clock > > phy: qcom-qmp: Fix phy pipe clock name > Moved the DT get into the registering function > > phy: qcom-qmp: Add support for IPQ8074 > Place the IPQ8074 related structs similar to existing SoC. > Renamed phy_phy clock as common clock > v4: > phy: qcom-qmp: Fix phy pipe clock name > Based on Vivek's comments, return failure only for > PCI/USB type of phys. > Removed Ack. > > phy: qcom-qmp: Handle unavailable registers > Removed this patch. > Incorrectly used a block of code that is not applicable > to IPQ8074, hence had to avoid an "unavailable" register. > Since that is addressed using 'has_phy_com_ctrl' this > patch is not needed. > > phy: qcom-qmp: Add support for IPQ8074 > Set 'has_phy_com_ctrl' to false > Remove ipq8074_pciephy_regs_layout > > v3: > PCI: dwc: qcom: Add support for IPQ8074 PCIe controller > Incoporate Stan's feedback:- > - Add SoC Wrapper and Synopsys Core IP versions > > v2: > dt-bindings: phy: qmp: Add output-clock-names > Added Rob H's Ack > > dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 > Removed example > Added IPQ8074 specific details > > phy: qcom-qmp: Fix phy pipe clock name > Added Vivek's Ack > > phy: qcom-qmp: Handle unavailable registers > No changes > > phy: qcom-qmp: Add support for IPQ8074 > No changes > > PCI: dwc: qcom: Use block IP version for operations > Added new patch to use block IP version instead of v1, v2... > > dt-bindings: pci: qcom: Add support for IPQ8074 > Removed example > Added IPQ8074 specific details > > PCI: dwc: qcom: Add support for IPQ8074 PCIe controller > Incorporated Bjorn's feedback:- > - Removed reset names, helper function to assert/deassert, helper > function to R/M/W register. > - Renamed sys_noc clock as iface clock > - Added deinit if phy power on fails > > v1: > Add definitions required to enable QMP phy support for IPQ8074. > > Add support for the IPQ8074 PCIe controller. IPQ8074 supports > Gen 1/2, one lane, two PCIe root complex with support for MSI and > legacy interrupts, and it conforms to PCI Express Base 2.1 > specification. > > Varadarajan Narayanan (7): > dt-bindings: phy: qmp: Add output-clock-names > dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 > phy: qcom-qmp: Fix phy pipe clock name > phy: qcom-qmp: Add support for IPQ8074 > PCI: dwc: qcom: Use block IP version for operations > dt-bindings: pci: qcom: Add support for IPQ8074 > PCI: dwc: qcom: Add support for IPQ8074 PCIe controller > > .../devicetree/bindings/pci/qcom,pcie.txt | 23 ++ > .../devicetree/bindings/phy/qcom-qmp-phy.txt | 11 + > drivers/pci/dwc/pcie-qcom.c | 378 > +++++++++++++++++---- > drivers/phy/qualcomm/phy-qcom-qmp.c | 147 +++++++- > 4 files changed, 485 insertions(+), 74 deletions(-) >
