On Fri, Jul 21, 2017 at 11:51 PM, Rafael J. Wysocki <r...@rjwysocki.net> wrote: > On Friday, July 21, 2017 06:20:15 PM Andy Shevchenko wrote: >> On Fri, Jul 21, 2017 at 5:46 PM, Rajmohan Mani <rajmohan.m...@intel.com> >> wrote: >> > This is the patch series for TPS68470 PMIC that works as a camera PMIC. >> > >> > The patch series provide the following 3 drivers, to help configure the >> > voltage regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be >> > able to use the camera sensors connected to this PMIC. >> > >> > TPS68470 MFD driver: >> > This is the multi function driver that initializes the TPS68470 PMIC and >> > supports the GPIO and Op Region functions. >> > >> > TPS68470 GPIO driver: >> > This is the PMIC GPIO driver that will be used by the OS GPIO layer, when >> > the BIOS / firmware triggered GPIO access is done. >> > >> > TPS68470 Op Region driver: >> > This is the driver that will be invoked, when the BIOS / firmware >> > configures the voltage / clock for the sensors / vcm devices connected to >> > the PMIC. >> > >> >> All three patches are good to me (we did few rounds of internal review >> before posting v4) >> >> Reviewed-by: Andy Shevchenko <andy.shevche...@gmail.com> > > OK, so how should they be routed?
Good question. I don't know how last time PMIC drivers were merged, here I think is just sane to route vi MFD with immutable branch created. -- With Best Regards, Andy Shevchenko
