On Friday, July 21, 2017 06:20:15 PM Andy Shevchenko wrote: > On Fri, Jul 21, 2017 at 5:46 PM, Rajmohan Mani <rajmohan.m...@intel.com> > wrote: > > This is the patch series for TPS68470 PMIC that works as a camera PMIC. > > > > The patch series provide the following 3 drivers, to help configure the > > voltage regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be > > able to use the camera sensors connected to this PMIC. > > > > TPS68470 MFD driver: > > This is the multi function driver that initializes the TPS68470 PMIC and > > supports the GPIO and Op Region functions. > > > > TPS68470 GPIO driver: > > This is the PMIC GPIO driver that will be used by the OS GPIO layer, when > > the BIOS / firmware triggered GPIO access is done. > > > > TPS68470 Op Region driver: > > This is the driver that will be invoked, when the BIOS / firmware > > configures the voltage / clock for the sensors / vcm devices connected to > > the PMIC. > > > > All three patches are good to me (we did few rounds of internal review > before posting v4) > > Reviewed-by: Andy Shevchenko <andy.shevche...@gmail.com>
OK, so how should they be routed? Thanks, Rafael
