[PATCH 2/2] MIPS: dts: Ci20: Add ethernet and fixed-regulator nodes

[Harvey Hunt]

Add devicetree nodes for the DM9000 and the ethernet power regulator.
Additionally, add a new pinctrl node for the ethernet chip's pins.

Signed-off-by: Harvey Hunt <harvey.h...@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <zubair.kakak...@imgtec.com>
Cc: Paul Burton <paul.bur...@imgtec.com>
Cc: Rob Herring <robh...@kernel.org> 
Cc: Mark Rutland <mark.rutl...@arm.com> 
Cc: Paul Cercueil <p...@crapouillou.net> 
Cc: Linus Walleij <linus.wall...@linaro.org> 
Cc: devicet...@vger.kernel.org 
Cc: linux-m...@linux-mips.org 
Cc: linux-kernel@vger.kernel.org 
---
Ralf, both of these patches rely on Paul Cercueil's pinctrl
and gpio patches from Linus Walleij's 4.13 pinctrl pull request.

 arch/mips/boot/dts/ingenic/ci20.dts | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts 
b/arch/mips/boot/dts/ingenic/ci20.dts
index fd138d99..6c38184 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 #include "jz4780.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        compatible = "img,ci20", "ingenic,jz4780";
@@ -21,6 +22,13 @@
                reg = <0x0 0x10000000
                       0x30000000 0x30000000>;
        };
+
+       eth0_power: fixedregulator@0 {
+               compatible = "regulator-fixed";
+               regulator-name = "eth0_power";
+               gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+               enable-active-high;
+       };
 };
 
 &ext {
@@ -123,6 +131,29 @@
                        };
                };
        };
+
+       dm9000@6 {
+               compatible = "davicom,dm9000";
+               davicom,no-eeprom;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&pins_nemc_cs6>;
+
+               reg = <6 0 1   /* addr */
+                      6 2 1>; /* data */
+
+               ingenic,nemc-tAS = <15>;
+               ingenic,nemc-tAH = <10>;
+               ingenic,nemc-tBP = <20>;
+               ingenic,nemc-tAW = <50>;
+               ingenic,nemc-tSTRV = <100>;
+
+               reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+               vcc-supply = <&eth0_power>;
+
+               interrupt-parent = <&gpe>;
+               interrupts = <19 4>;
+       };
 };
 
 &bch {
@@ -165,4 +196,10 @@
                groups = "nemc-cs1";
                bias-disable;
        };
+
+       pins_nemc_cs6: nemc-cs6 {
+               function = "nemc-cs6";
+               groups = "nemc-cs6";
+               bias-disable;
+       };
 };
-- 
2.7.4