Add specific DTS file and bindings for sama5d27 SoM1 board.

Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 ++++++++++++++++++++++++++++++
 1 file changed, 178 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi 
b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
new file mode 100644
index 0000000..c3a1dc8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -0,0 +1,178 @@
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2017 Cristian Birsan <cristian.bir...@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.bez...@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+       model = "Atmel SAMA5D27 SoM1";
+       compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", 
"atmel,sama5";
+
+       clocks {
+               slow_xtal {
+                       clock-frequency = <32768>;
+               };
+
+               main_xtal {
+                       clock-frequency = <24000000>;
+               };
+       };
+
+       ahb {
+               apb {
+                       qspi1: spi@f0024000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_qspi1_default>;
+                               flash@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       compatible = "jedec,spi-nor";
+                                       reg = <0>;
+                                       spi-max-frequency = <83000000>;
+                                       m25p,fast-read;
+
+                                       at91bootstrap@00000000 {
+                                               label = "at91bootstrap";
+                                               reg = <0x00000000 0x00010000>;
+                                       };
+
+                                       bootloaderenv@00010000 {
+                                               label = "bootloader env";
+                                               reg = <0x00010000 0x00010000>;
+                                       };
+
+                                       bootloader@00020000 {
+                                               label = "bootloader";
+                                               reg = <0x00020000 0x00070000>;
+                                       };
+
+                                       dtb@00090000 {
+                                               label = "device tree";
+                                               reg = <0x00090000 0x00010000>;
+                                       };
+
+                                       kernel@000a0000 {
+                                               label = "kernel";
+                                               reg = <0x000a0000 0x00400000>;
+                                       };
+                               };
+                       };
+
+                       macb0: ethernet@f8008000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_macb0_default>;
+                               phy-mode = "rmii";
+
+                               ethernet-phy@1 {
+                                       reg = <0x1>;
+                                       interrupt-parent = <&pioA>;
+                                       interrupts = <PIN_PD31 
IRQ_TYPE_LEVEL_LOW>;
+                                       pinctrl-names = "default";
+                                       pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+                               };
+                       };
+
+                       i2c0: i2c@f8028000 {
+                               dmas = <0>, <0>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_i2c0_default>;
+                               i2c-sda-hold-time-ns = <350>;
+                               status = "disabled";
+
+                               24aa@50 {
+                                       compatible = "24mac602";
+                                       reg = <0x50>;
+                                       pagesize = <8>;
+                                       start-offset = /bits/ 8 <0xf8>;
+                                       read-only;
+                               };
+                       };
+
+                       pinctrl@fc038000 {
+
+                               pinctrl_i2c0_default: i2c0_default {
+                                       pinmux = <PIN_PD21__TWD0>,
+                                                <PIN_PD22__TWCK0>;
+                                       bias-disable;
+                               };
+
+                               pinctrl_macb0_default: macb0_default {
+                                       pinmux = <PIN_PD9__GTXCK>,
+                                                <PIN_PD10__GTXEN>,
+                                                <PIN_PD11__GRXDV>,
+                                                <PIN_PD12__GRXER>,
+                                                <PIN_PD13__GRX0>,
+                                                <PIN_PD14__GRX1>,
+                                                <PIN_PD15__GTX0>,
+                                                <PIN_PD16__GTX1>,
+                                                <PIN_PD17__GMDC>,
+                                                <PIN_PD18__GMDIO>;
+                                       bias-disable;
+                               };
+
+                               pinctrl_macb0_phy_irq: macb0_phy_irq {
+                                       pinmux = <PIN_PD31__GPIO>;
+                                       bias-disable;
+                               };
+
+                               pinctrl_qspi1_default: qspi1_default {
+                                       sck_cs {
+                                               pinmux = <PIN_PB5__QSPI1_SCK>,
+                                                        <PIN_PB6__QSPI1_CS>;
+                                               bias-disable;
+                                       };
+
+                                       data {
+                                               pinmux = <PIN_PB7__QSPI1_IO0>,
+                                                        <PIN_PB8__QSPI1_IO1>,
+                                                        <PIN_PB9__QSPI1_IO2>,
+                                                        <PIN_PB10__QSPI1_IO3>;
+                                               bias-pull-up;
+                                       };
+                               };
+                       };
+               };
+       };
+};
-- 
2.7.4

Reply via email to