This patch adds the binding documentation for Spreadtrum hardware spinlock
device.
Signed-off-by: Baolin Wang <baolin.w...@spreadtrum.com>
---
.../devicetree/bindings/hwlock/sprd-hwspinlock.txt | 23 ++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
diff --git a/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
b/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
new file mode 100644
index 0000000..581db9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
@@ -0,0 +1,23 @@
+SPRD Hardware Spinlock Device Binding
+-------------------------------------
+
+Required properties :
+- compatible : should be "sprd,hwspinlock-r3p0".
+- reg : the register address of hwspinlock.
+- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
+ hwlock, so the number of cells should be <1> here.
+- clock-names : Must contain "enable".
+- clocks : Must contain a phandle entry for the clock in clock-names, see the
+ common clock bindings.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example of hwlock provider:
+ hwspinlock@40500000 {
+ compatible = "sprd,hwspinlock-r3p0";
+ reg = <0 0x40500000 0 0x1000>;
+ #hwlock-cells = <1>;
+ clock-names = "enable";
+ clocks = <&clk_aon_apb_gates0 22>;
+ };
--
1.7.9.5
