On Tue, Apr 18, 2017 at 08:01:33AM -0700, Andrey Smirnov wrote:
> Enable PCIe peripheral on this board.
>
> Cc: yurov...@gmail.com
> Cc: Dong Aisheng <aisheng.d...@nxp.com>
> Cc: Shawn Guo <shawn...@kernel.org>
> Cc: Sascha Hauer <ker...@pengutronix.de>
> Cc: Fabio Estevam <fabio.este...@nxp.com>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: Russell King <li...@armlinux.org.uk>
> Cc: devicet...@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-ker...@lists.infradead.org
> Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
> ---
> arch/arm/boot/dts/imx7d-sdb.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index d6f2dda..65dda66 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -349,6 +349,12 @@
> };
> };
>
> +&pcie {
> + pinctrl-names = "default";
No corresponding pinctrl-0 entry? In that case, there is no point to
have pinctrl-names.
Shawn
> + reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> &pwm1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_pwm1>;
> --
> 2.9.3
>
