[PATCH v1 1/2] gpio: gpio-wcove: fix GPIO irq status mask

[sathyanarayanan . kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppusw...@linux.intel.com>

According to Whiskey cove PMIC spec, bit 7 of GPIOIRQ0_REG belongs to
battery IO. So we should skip this bit when checking for GPIO irq pending
status. Otherwise, wcove_gpio_irq_handler() might go into the infinite
loop until irq "pending" status becomes 0. This patch fixes this issue.

Signed-off-by: Kuppuswamy Sathyanarayanan 
<sathyanarayanan.kuppusw...@linux.intel.com>
---
 drivers/gpio/gpio-wcove.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index 97613de..68ef061 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -51,6 +51,8 @@
 #define GROUP1_NR_IRQS         6
 #define IRQ_MASK_BASE          0x4e19
 #define IRQ_STATUS_BASE                0x4e0b
+#define GPIO_IRQ0_MASK         0x7f
+#define GPIO_IRQ1_MASK         0x3f
 #define UPDATE_IRQ_TYPE                BIT(0)
 #define UPDATE_IRQ_MASK                BIT(1)
 
@@ -309,7 +311,7 @@ static irqreturn_t wcove_gpio_irq_handler(int irq, void 
*data)
                return IRQ_NONE;
        }
 
-       pending = p[0] | (p[1] << 8);
+       pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
        if (!pending)
                return IRQ_NONE;
 
@@ -333,7 +335,8 @@ static irqreturn_t wcove_gpio_irq_handler(int irq, void 
*data)
                        break;
                }
 
-               pending = p[0] | (p[1] << 8);
+               pending = (p[0] & GPIO_IRQ0_MASK) |
+                       ((p[1] & GPIO_IRQ1_MASK) << 7);
        }
 
        return IRQ_HANDLED;
-- 
2.7.4