hi Cyrille
I see your patch series
[PATCH v5 0/6] mtd: spi-nor: parse SFDP tables to setup (Q)SPI memories
No problem, I rebase my V2 onto your patch
BR
Ludo
On 03/29/2017 06:51 PM, Cyrille Pitchen wrote:
Hi Ludovic,
Le 27/03/2017 à 14:54, Ludovic Barre a écrit :
From: Ludovic Barre <ludovic.ba...@st.com>
This patch set adds a SPI-NOR driver for stm32 QSPI controller.
It is a specialized SPI interface for serial Flash devices.
It supports 1 or 2 Flash device with single, dual and quad SPI Flash memories.
It can operate in any of the following modes:
-indirect mode: all the operations are performed using the quadspi
registers
-read memory-mapped mode: the external Flash memory is mapped to the
microcontroller address space and is seen by the system as if it was
an internal memory
Ludovic Barre (2):
dt-bindings: Document the STM32 QSPI bindings
mtd: spi-nor: add driver for STM32 quad spi flash controller
.../devicetree/bindings/mtd/stm32-quadspi.txt | 45 ++
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/stm32-quadspi.c | 679 +++++++++++++++++++++
4 files changed, 732 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/stm32-quadspi.c
Just a small word to warn you that I'm likely to ask you to rebase this
series onto the patch "mtd: spi-nor: introduce more SPI protocols and
the Dual Transfer Mode". Indeed, I need to synchronize with Marek first
but I plan to merge this patch within few days.
Best regards,
Cyrille
