From: Andrew Lunn <and...@lunn.ch> Add properties to the gpio nodes to allow them to be also used as pwm lines.
Signed-off-by: Andrew Lunn <and...@lunn.ch> URL: https://patchwork.ozlabs.org/patch/427294/ Signed-off-by: Ralph Sennhauser <ralph.sennhau...@gmail.com> --- arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++-- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++-- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++-- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++-- 4 files changed, 30 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index cc011c8..aa9fe72 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -138,24 +138,30 @@ gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 07c5090..fc3934f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -203,24 +203,30 @@ internal-regs { gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <17>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>; + clocks = <&coreclk 0>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 64e936a..04dda6a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -286,24 +286,28 @@ internal-regs { gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index d1383dd..fb6d28a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -324,24 +324,30 @@ internal-regs { gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { -- 2.10.2
