Add the device tree binding documentation for the ADXL345 3-axis digital accelerometer.
Signed-off-by: Eva Rachel Retuya <eraret...@gmail.com> --- Changes from v4: * Update subject-prefix * Update node name from "adxl345@unit-address" to "accelerometer@unit-address" .../devicetree/bindings/iio/accel/adxl345.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/adxl345.txt diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt new file mode 100644 index 0000000..e7111b0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt @@ -0,0 +1,38 @@ +Analog Devices ADXL345 3-Axis, +/-(2g/4g/8g/16g) Digital Accelerometer + +http://www.analog.com/en/products/mems/accelerometers/adxl345.html + +Required properties: + - compatible : should be "adi,adxl345" + - reg : the I2C address or SPI chip select number of the sensor + +Required properties for SPI bus usage: + - spi-max-frequency : set maximum clock frequency, must be 5000000 + - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3 + +Optional properties: + - interrupt-parent : phandle to the parent interrupt controller as documented + in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + - interrupts: interrupt mapping for IRQ as documented in + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Example for a I2C device node: + + accelerometer@2a { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + +Example for a SPI device node: + + accelerometer@0 { + compatible = "adi,adxl345"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; -- 2.7.4
