The "samsung,exynos5433-mipi-video-phy" and "samsung,exynos5250-dwusb3"
DT bindings don't specify a reg property for these nodes, so having a
unit name leads to the following DTC warnings:
Node /soc/video-phy@105c0710 has a unit name, but no reg property
Node /soc/usb@15400000 has a unit name, but no reg property
Node /soc/usb@15a00000 has a unit name, but no reg property
Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v3:
- Use proper device node names, suggested by Krzysztof.
Changes in v2:
- Fix subject line since I forgot the "exynos" prefix.
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 59788d89b686..57c7bbeb65a7 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -706,7 +706,7 @@
interrupts = <GIC_PPI 9 0xf04>;
};
- mipi_phy: video-phy@105c0710 {
+ mipi_phy: video-phy {
compatible = "samsung,exynos5433-mipi-video-phy";
#phy-cells = <1>;
samsung,pmu-syscon = <&pmu_system_controller>;
@@ -1357,7 +1357,7 @@
status = "disabled";
};
- usbdrd30: usb@15400000 {
+ usbdrd30: usbdrd {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
<&cmu_fsys CLK_SCLK_USBDRD30>;
@@ -1404,7 +1404,7 @@
status = "disabled";
};
- usbhost30: usb@15a00000 {
+ usbhost30: usbhost {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
<&cmu_fsys CLK_SCLK_USBHOST30>;
--
2.7.4
