Hi, I add the some comment as following: - ldo23/25/31/38 have the different value between tm2 and tm2e. - The patch[1] was alread posted. I think you better to rebase this patch on patch[1]. [1] https://patchwork.kernel.org/patch/9491769/ - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
I add detailed comments on below.
On 2017년 01월 05일 17:27, Jaechul Lee wrote:
> From: Andi Shyti <andi.sh...@samsung.com>
>
> Currently tm2e dts includes tm2 but there are some differences
> between the two boards and tm2 has some properties that tm2e
> doesn't have.
>
> That's why it's important to keep the two dts files independent
> and put all the commonalities in a tm2-common.dtsi file.
>
> Signed-off-by: Andi Shyti <andi.sh...@samsung.com>
> Signed-off-by: Jaechul Lee <jcsing....@samsung.com>
> ---
> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138
> +-------------------
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
> 3 files changed, 1136 insertions(+), 1120 deletions(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> new file mode 100644
> index 0000000..7ad0019
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -0,0 +1,1116 @@
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5433.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
[snip]
> +&hsi2c_0 {
> + status = "okay";
> + clock-frequency = <2500000>;
> +
> + s2mps13-pmic@66 {
> + compatible = "samsung,s2mps13-pmic";
> + interrupt-parent = <&gpa0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> + samsung,s2mps11-wrstbi-ground;
> +
> + s2mps13_osc: clocks {
> + compatible = "samsung,s2mps13-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
> + "s2mps13_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_0.9V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD1_E_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD10_DPLL_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD18_LLI_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD33_USB30_3.0V_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_INT_M_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_KFC_M_1.1V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDD_G3D_M_0.95V_AP";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDDQ_EFUSE";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "V_TFLASH_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "V_CODEC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VDDA_1.8V_COMP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VCC_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "CAM_IO_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1200000>;
ldo23_reg has the different value between tm2 and tm2e.
- tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
- tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VT_CAM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "CAM_SEN_A2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
- tm2 : name - CAM_SEN_A2.8V_AP
- tm2e : name - UNUSED_LDO15
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "CAM_AF_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "VCC_3.0V_LCD_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "VCC_1.8V_LCD_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "VT_CAM_2.8V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "TSP_AVDD_3.3V_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo31_reg: LDO31 {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
ldo31_reg has the different value between tm2 and tm2e.
- tm2 : name - TSP_VDD_1.85V_AP, min/max-microvolt :1850000
- tm2e : name - TSP_VDD_1.8V_AP, min/max-microvolt :1800000
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "VTOUCH_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "VTOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "VCC_1.8V_MHL_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "OIS_VM_2.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo36_reg: LDO36 {
> + regulator-name = "VSIL_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo37_reg: LDO37 {
> + regulator-name = "VF_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo38_reg: LDO38 {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
ldo38_reg has the different value between tm2 and tm2e.
- tm2 : name - VCC_3.0V_MOTOR_AP, min/max-microvolt :3000000
- tm2e : name - VCC_3.3V_MOTOR_AP, min/max-microvolt :3300000
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_EGL_1.0V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_KFC_1.0V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_INT_0.95V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "VDD_G3D_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "VDD_MEM1_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "VDD_LLDO_1.35V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "VDD_MLDO_2.0V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_mem2";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_8 {
> + status = "okay";
> +
> + max77843@66 {
> + compatible = "maxim,max77843";
> + interrupt-parent = <&gpa1>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reg = <0x66>;
> +
> + muic: max77843-muic {
> + compatible = "maxim,max77843-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77843-regulator";
> + safeout1_reg: SAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + safeout2_reg: SAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <100000>;
> + regulator-max-microamp = <3150000>;
> + };
> + };
> +
> + haptic: max77843-haptic {
> + compatible = "maxim,max77843-haptic";
> + haptic-supply = <&ldo38_reg>;
> + pwms = <&pwm 0 33670 0>;
> + pwm-names = "haptic";
> + };
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + status = "okay";
> + num-slots = <1>;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + cap-mmc-highspeed;
> + non-removable;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 3>;
> + samsung,read-strobe-delay = <90>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> + &sd0_bus8 &sd0_rdqs>;
> + bus-width = <8>;
> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> + assigned-clock-rates = <800000000>;
> +};
> +
> +&mshc_2 {
> + status = "okay";
> + num-slots = <1>;
> + cap-sd-highspeed;
> + disable-wp;
> + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
> + bus-width = <4>;
> +};
> +
> +&ppmu_d0_general {
> + status = "okay";
> + events {
> + ppmu_event0_d0_general: ppmu-event0-d0-general {
> + event-name = "ppmu-event0-d0-general";
> + };
> + };
> +};
> +
> +&ppmu_d1_general {
> + status = "okay";
> + events {
> + ppmu_event0_d1_general: ppmu-event0-d1-general {
> + event-name = "ppmu-event0-d1-general";
> + };
> + };
> +};
> +
> +&pinctrl_alive {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
The following patches[1] touch the tm2.dts file about pinctrl naming convention.
So, I recommend that this patch shoud be rebased on patch[1] to prevent the
merge conflict.
[1] https://patchwork.kernel.org/patch/9491769/
- ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
> + initial_alive: initial-state {
> + PIN(IN, gpa0-0, DOWN, LV1);
> + PIN(IN, gpa0-1, NONE, LV1);
> + PIN(IN, gpa0-2, DOWN, LV1);
> + PIN(IN, gpa0-3, NONE, LV1);
> + PIN(IN, gpa0-4, NONE, LV1);
> + PIN(IN, gpa0-5, DOWN, LV1);
> + PIN(IN, gpa0-6, NONE, LV1);
> + PIN(IN, gpa0-7, NONE, LV1);
> +
> + PIN(IN, gpa1-0, UP, LV1);
> + PIN(IN, gpa1-1, NONE, LV1);
> + PIN(IN, gpa1-2, NONE, LV1);
> + PIN(IN, gpa1-3, DOWN, LV1);
> + PIN(IN, gpa1-4, DOWN, LV1);
> + PIN(IN, gpa1-5, NONE, LV1);
> + PIN(IN, gpa1-6, NONE, LV1);
> + PIN(IN, gpa1-7, NONE, LV1);
> +
> + PIN(IN, gpa2-0, NONE, LV1);
> + PIN(IN, gpa2-1, NONE, LV1);
> + PIN(IN, gpa2-2, NONE, LV1);
> + PIN(IN, gpa2-3, DOWN, LV1);
> + PIN(IN, gpa2-4, NONE, LV1);
> + PIN(IN, gpa2-5, DOWN, LV1);
> + PIN(IN, gpa2-6, DOWN, LV1);
> + PIN(IN, gpa2-7, NONE, LV1);
> +
> + PIN(IN, gpa3-0, DOWN, LV1);
> + PIN(IN, gpa3-1, DOWN, LV1);
> + PIN(IN, gpa3-2, NONE, LV1);
> + PIN(IN, gpa3-3, DOWN, LV1);
> + PIN(IN, gpa3-4, NONE, LV1);
> + PIN(IN, gpa3-5, DOWN, LV1);
> + PIN(IN, gpa3-6, DOWN, LV1);
> + PIN(IN, gpa3-7, DOWN, LV1);
> +
> + PIN(IN, gpf1-0, NONE, LV1);
> + PIN(IN, gpf1-1, NONE, LV1);
> + PIN(IN, gpf1-2, DOWN, LV1);
> + PIN(IN, gpf1-4, UP, LV1);
> + PIN(OUT, gpf1-5, NONE, LV1);
> + PIN(IN, gpf1-6, DOWN, LV1);
> + PIN(IN, gpf1-7, DOWN, LV1);
> +
> + PIN(IN, gpf2-0, DOWN, LV1);
> + PIN(IN, gpf2-1, DOWN, LV1);
> + PIN(IN, gpf2-2, DOWN, LV1);
> + PIN(IN, gpf2-3, DOWN, LV1);
> +
> + PIN(IN, gpf3-0, DOWN, LV1);
> + PIN(IN, gpf3-1, DOWN, LV1);
> + PIN(IN, gpf3-2, NONE, LV1);
> + PIN(IN, gpf3-3, DOWN, LV1);
> +
> + PIN(IN, gpf4-0, DOWN, LV1);
> + PIN(IN, gpf4-1, DOWN, LV1);
> + PIN(IN, gpf4-2, DOWN, LV1);
> + PIN(IN, gpf4-3, DOWN, LV1);
> + PIN(IN, gpf4-4, DOWN, LV1);
> + PIN(IN, gpf4-5, DOWN, LV1);
> + PIN(IN, gpf4-6, DOWN, LV1);
> + PIN(IN, gpf4-7, DOWN, LV1);
> +
> + PIN(IN, gpf5-0, DOWN, LV1);
> + PIN(IN, gpf5-1, DOWN, LV1);
> + PIN(IN, gpf5-2, DOWN, LV1);
> + PIN(IN, gpf5-3, DOWN, LV1);
> + PIN(OUT, gpf5-4, NONE, LV1);
> + PIN(IN, gpf5-5, DOWN, LV1);
> + PIN(IN, gpf5-6, DOWN, LV1);
> + PIN(IN, gpf5-7, DOWN, LV1);
> + };
[snip]
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos5433-tm2-common.dtsi"
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> index 1db4e7f..81fdbef 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -11,7 +11,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include "exynos5433-tm2.dts"
> +#include "exynos5433-tm2-common.dtsi"
>
> / {
> model = "Samsung TM2E board";
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
<<attachment: cw00_choi.vcf>>
