On Thu, Dec 22, 2016 at 05:13:25PM +1300, Chris Packham wrote: > Compared to the armada-xp the 98DX3336 uses different registers to set > the boot address for the secondary CPU so a new enable-method is needed. > This will only work if the machine definition doesn't define an overall > smp_ops because there is not currently a way of overriding this from the > device tree if it is set in the machine definition.
Doesn't look like you documented the enable-method value. > Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz> > --- > .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 18 ++++++ > arch/arm/mach-mvebu/Makefile | 1 + > arch/arm/mach-mvebu/common.h | 1 + > arch/arm/mach-mvebu/platsmp.c | 43 ++++++++++++++ > arch/arm/mach-mvebu/pmsu-98dx3236.c | 69 > ++++++++++++++++++++++ > 5 files changed, 132 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt > create mode 100644 arch/arm/mach-mvebu/pmsu-98dx3236.c
