Setting the irq_enable bits is taken care of by the irq chip when we request the irqs and the driver should not be meddling with the irq?_en registers itself.
Signed-off-by: Hans de Goede <[email protected]> --- drivers/extcon/extcon-axp288.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 7aec413..a27ee68 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -70,12 +70,6 @@ #define DET_STAT_CDP 2 #define DET_STAT_DCP 3 -/* IRQ enable-1 register */ -#define PWRSRC_IRQ_CFG_MASK (BIT(4)|BIT(3)|BIT(2)) - -/* IRQ enable-6 register */ -#define BC12_IRQ_CFG_MASK BIT(1) - enum axp288_extcon_reg { AXP288_PS_STAT_REG = 0x00, AXP288_PS_BOOT_REASON_REG = 0x02, @@ -83,8 +77,6 @@ enum axp288_extcon_reg { AXP288_BC_VBUS_CNTL_REG = 0x2d, AXP288_BC_USB_STAT_REG = 0x2e, AXP288_BC_DET_STAT_REG = 0x2f, - AXP288_PWRSRC_IRQ_CFG_REG = 0x40, - AXP288_BC12_IRQ_CFG_REG = 0x45, }; enum axp288_mux_select { @@ -242,15 +234,10 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data) return IRQ_HANDLED; } -static void axp288_extcon_enable_irq(struct axp288_extcon_info *info) +static void axp288_extcon_enable(struct axp288_extcon_info *info) { - /* Unmask VBUS interrupt */ - regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG, - PWRSRC_IRQ_CFG_MASK); regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, BC_GLOBAL_RUN, 0); - /* Unmask the BC1.2 complete interrupts */ - regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK); /* Enable the charger detection logic */ regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, BC_GLOBAL_RUN, BC_GLOBAL_RUN); @@ -327,8 +314,8 @@ static int axp288_extcon_probe(struct platform_device *pdev) } } - /* Enable interrupts */ - axp288_extcon_enable_irq(info); + /* Start charger cable type detection */ + axp288_extcon_enable(info); return 0; } -- 2.9.3
