Hi, On Thu, Nov 24, 2016 at 01:33:43PM +0100, Nicolas Saenz Julienne wrote: > Adds device tree documentation for SBS charger compilant devices as defined > here: http://sbs-forum.org/specs/sbc110.pdf > > Signed-off-by: Nicolas Saenz Julienne <nicolas.sa...@prodys.net> > --- > v2 -> v3: > - add part number as compatible > > .../bindings/power/supply/sbs_sbs-charger.txt | 24 > ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt > > diff --git > a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt > b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt > new file mode 100644 > index 0000000..f6b6027 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt > @@ -0,0 +1,24 @@ > +SBS sbs-charger > +~~~~~~~~~~ > + > +Required properties: > + - compatible: should contain one of the following: > + - "lltc,ltc4100" > + - "sbs,sbs-charger"
That's not what I meant. The idea is to specify "lltc,ltc4100" with
"sbs,sbs-charger" as fallback. Then the driver for now only handles
"sbs,sbs-charger", but if any vendor registers need to be supported
we have a more specific compatible value in DT, that can be used to
identify the device.
> +Optional properties:
> +- interrupt-parent: Should be the phandle for the interrupt controller. Use
> in
> + conjunction with "interrupts".
> +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
> + "interrupt-parent". If an interrupt is not provided the driver will
> switch
> + automatically to polling.
> +
> +Example:
> +
> + ltc4100@9 {
> + compatible = "sbs,sbs-charger";
> + reg = <0x9>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + };
So the example would look like
compatible = "lltc,ltc4100", "sbs,sbs-charger";
-- Sebastian
signature.asc
Description: PGP signature
