The node name for the power seq pin is mmc2@0 like the mmc2_pins_a one.
This makes the original node (mmc2_pins_a) scrapped out of the dtb and
result in a unusable eMMC if U-Boot didn't configured the pins to the
correct functions.
Changes since v1:
* Rename the node mmc2-rst-pin
Signed-off-by: Emmanuel Vadot <m...@bidouilliste.com>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
index 5ea4915..10d3074 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -56,7 +56,7 @@
};
&pio {
- mmc2_pins_nrst: mmc2@0 {
+ mmc2_pins_nrst: mmc2-rst-pin {
allwinner,pins = "PC16";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
--
2.9.2
