> On Tue, 27 Feb 2007 09:06:21 -0500 Eric Buddington <[EMAIL PROTECTED]> wrote: > 2.6.20-mm2 #1 Mon Feb 26 13:16:04 EST 2007 i686 unknown > > I have an external USB drive (WD MyBook 5000YS), which I use for backups. > > When I try to back up to it, it works for a while, but inevitably > starts resetting like mad, gives I/O errors, and then (here's the > problem), the softdog module reboots the system. > > --------------------------- > scsi1 : SCSI emulation for USB Mass Storage devices > input: Western Digital External HDD as /class/input/input8 > input: USB HID v1.11 Device [Western Digital External HDD] on > usb-0000:00:03.2-6 > .2 > scsi 1:0:0:0: Direct-Access WD 5000YS External 106a PQ: 0 ANSI: 4 > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > sda: sda1 sda2 > sd 1:0:0:0: Attached scsi disk sda > sd 1:0:0:0: Attached scsi generic sg0 type 0 > reiser4[pdflush(194)]: disable_write_barrier > (fs/reiser4/wander.c:234)[zam-1055] > : > NOTICE: md1 does not support write barriers, using synchronous write instead. > reiser4: sda2: found disk format 4.0.0. > > ---- (works fine here for a while, then:) ---------- > > usb 1-6.2: reset high speed USB device using ehci_hcd and address 36 > usb 1-6.2: device descriptor read/64, error -110 > usb 1-6.2: device descriptor read/64, error -110 > usb 1-6.2: reset high speed USB device using ehci_hcd and address 36 > usb 1-6.2: device descriptor read/64, error -110 > usb 1-6.2: device descriptor read/64, error -110 > usb 1-6.2: reset high speed USB device using ehci_hcd and address 36 > usb 1-6.2: device descriptor read/8, error -110 > usb 1-6.2: device descriptor read/8, error -110 > usb 1-6.2: reset high speed USB device using ehci_hcd and address 36 > usb 1-6.2: device descriptor read/8, error -110 > usb 1-6.2: device descriptor read/8, error -110 > sd 1:0:0:0: scsi: Device offlined - not ready after error recovery > sd 1:0:0:0: SCSI error: return code = 0x00050000 > end_request: I/O error, dev sda, sector 919931588 > sd 1:0:0:0: rejecting I/O to offline device > sd 1:0:0:0: SCSI error: return code = 0x00010000 > end_request: I/O error, dev sda, sector 919931828 > sd 1:0:0:0: rejecting I/O to offline device > sd 1:0:0:0: rejecting I/O to offline device > sd 1:0:0:0: rejecting I/O to offline device
Does 2.6.20 do this? 2.6.21-rc1? - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
