On Tue, Nov 22, 2016 at 11:58:29PM +0800, Icenowy Zheng wrote:
> Allwinner A64 have two HCI USB controllers, a OTG controller and a USB
> PHY device which have two ports. One of the port is wired to both a HCI
> USB controller and the OTG controller, which is currently not supported.
> The another one is only wired to a HCI controller, and the device node of
> OHCI/EHCI controller of the port can be added now.
>
> Also the A64 USB PHY device node is also added for the HCI controllers to
> work.
>
> Signed-off-by: Icenowy Zheng <icen...@aosc.xyz>
> ---
> Changes since v1:
> - Remove manual CLK_USB_OHCI0 gate, as it's dealed by ccu driver now.
> - Sort the nodes and fixed {e,o}hci1 regs.
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 44
> +++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 3d70be3..2572dd6 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -122,6 +122,50 @@
> #size-cells = <1>;
> ranges;
>
> + usbphy: phy@01c19400 {
> + compatible = "allwinner,sun50i-a64-usb-phy";
> + reg = <0x01c19400 0x14>,
> + <0x01c1b800 0x4>;
> + reg-names = "phy_ctrl",
> + "pmu1";
> + clocks = <&ccu CLK_USB_PHY0>,
> + <&ccu CLK_USB_PHY1>;
> + clock-names = "usb0_phy",
> + "usb1_phy";
> + resets = <&ccu RST_USB_PHY0>,
> + <&ccu RST_USB_PHY1>;
> + reset-names = "usb0_reset",
> + "usb1_reset";
> + status = "disabled";
> + #phy-cells = <1>;
> + };
> +
> + ohci1: usb@01c1b400 {
> + compatible = "allwinner,sun50i-a64-ohci",
> "generic-ohci";
> + reg = <0x01c1b400 0x100>;
> + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI1>,
> + <&ccu CLK_USB_OHCI1>;
> + resets = <&ccu RST_BUS_OHCI1>;
> + phys = <&usbphy 1>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + ehci1: usb@01c1b000 {
> + compatible = "allwinner,sun50i-a64-ehci",
> "generic-ehci";
> + reg = <0x01c1b000 0x100>;
> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI1>,
> + <&ccu CLK_BUS_EHCI1>,
> + <&ccu CLK_USB_OHCI1>;
> + resets = <&ccu RST_BUS_OHCI1>,
> + <&ccu RST_BUS_EHCI1>;
> + phys = <&usbphy 1>;
> + phy-names = "usb";
> + status = "disabled";
> + };The nodes were inverted, also, please use "arm64: dts: allwinner:" for your prefix in the future. I fixed both issues and queued for 4.11. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
