[]..
>>
>> The proper sequence sounds like it should be:
>>
>> 1. Enable GDSC for main domain
>> 2. Enable clocks for main domain (video_{core,maxi,ahb,axi}_clk)
>> 3. Write the two registers to assert hw signal for subdomains
>> 4. Enable GDSCs for two subdomains
>> 5. Enable clocks for subdomains (video_subcore{0,1}_clk)
>>
[]..
>
> So the above is the sequence which is actually carried out on the
> firmware side. The same can be done in host as well.
By the 'above sequence is done on firmware side', I hope you don;t mean *all* 5
steps.
I guess you mean only step 3 is done by firmware?
> The clocks stuck issue indeed is not there with this. But with the
> above sequence we need to add a step to do inverse of STEP3
> above (ie write the registers to de-assert hw_signal), to keep
> the subdomains in off, till firmware uses it. So the above sequence
> helps to avoid masking the halt check, although the host really
> does not wants to use these clocks, except setting it up for the
> firmware.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
