On Sat, Nov 05, 2016 at 04:05:48PM +0800, Hao Zhang wrote:
> Add soc a64 dma support.
> 
> Signed-off-by: Hao Zhang <hao5781...@gmail.com>
> ---
>  drivers/dma/sun6i-dma.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> index 8346199..00fcfc7 100644
> --- a/drivers/dma/sun6i-dma.c
> +++ b/drivers/dma/sun6i-dma.c
> @@ -1028,11 +1028,23 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
>       .nr_max_vchans   = 34,
>  };
>  
> +/*
> + * The A64 has 8 physical channels, a maximum DRQ port id of 27,
> + * and a total of 38 usable source and destination endpoints.
> + */
> +
> +static struct sun6i_dma_config sun50i_a64_dma_cfg = {
> +     .nr_max_channels = 8,
> +     .nr_max_requests = 27,
> +     .nr_max_vchans   = 38,
> +};
> +
>  static const struct of_device_id sun6i_dma_match[] = {
>       { .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
>       { .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
>       { .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg 
> },
>       { .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
> +     { .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg 
> },

You need to add that compatible to the DT binding documentation.

>       { /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, sun6i_dma_match);
> @@ -1110,6 +1122,13 @@ static int sun6i_dma_probe(struct platform_device 
> *pdev)
>       sdc->slave.dst_addr_widths              = 
> BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
>                                                 
> BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
>                                                 
> BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
> +
> +     if (of_device_is_compatible(pdev->dev.of_node,
> +                                 "allwinner,sun50i-a64-dma")) {
> +             sdc->slave.src_addr_widths      |= 
> BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> +             sdc->slave.dst_addr_widths      |= 
> BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> +     }
> +

You'll also need to change convert_buswidth, it will reject any width
higher than 4 bytes.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature

Reply via email to