Acked-by: Rob Herring <r...@kernel.org>
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
Documentation/devicetree/bindings/arm/arm,scpi.txt | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt
b/Documentation/devicetree/bindings/arm/arm,scpi.txt
index faa4b44..04bc171 100644
--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@@ -7,7 +7,7 @@ by Linux to initiate various system control and power
operations.
Required properties:
-- compatible : should be "arm,scpi"
+- compatible : should be "arm,scpi" or "amlogic,meson-gxbb-scpi"
- mboxes: List of phandle and mailbox channel specifiers
All the channels reserved by remote SCP firmware for use by
SCPI message protocol should be specified in any order
@@ -60,7 +60,8 @@ A small area of SRAM is reserved for SCPI communication
between application
processors and SCP.
Required properties:
-- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
+- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno,
+ or "amlogic,meson-gxbb-sram" for Amlogic GXBB SoC.
The rest of the properties should follow the generic mmio-sram description
found in ../../sram/sram.txt
@@ -70,7 +71,8 @@ Each sub-node represents the reserved area for SCPI.
Required sub-node properties:
- reg : The base offset and size of the reserved area with the SRAM
- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
- shared memory on Juno platforms
+ shared memory on Juno platforms or
+ "amlogic,meson-gxbb-scp-shmem" for Amlogic GXBB SoC.
Sensor bindings for the sensors based on SCPI Message Protocol
--------------------------------------------------------------
--
1.9.1
