The internal 60Mhz clock for host2 and host3 are useless in ULPI
phy mode, so we disable it when configuring ULPI PHY node for
those host.
Signed-off-by: Fabien Lahoudere <fabien.lahoud...@collabora.co.uk>
---
drivers/usb/chipidea/usbmisc_imx.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c
b/drivers/usb/chipidea/usbmisc_imx.c
index 11f51bd..e77a4ed 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -53,6 +53,9 @@
#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
#define MX53_USB_UH2_CTRL_OFFSET 0x14
#define MX53_USB_UH3_CTRL_OFFSET 0x18
+#define MX53_USB_CLKONOFF_CTRL_OFFSET 0x24
+#define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21)
+#define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22)
#define MX53_BM_OVER_CUR_DIS_H1 BIT(5)
#define MX53_BM_OVER_CUR_DIS_OTG BIT(8)
#define MX53_BM_OVER_CUR_DIS_UHx BIT(30)
@@ -239,6 +242,10 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data
*data)
val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
| MX53_USB_UHx_CTRL_ULPI_INT_EN;
writel(val, reg);
+ /* Disable internal 60Mhz clock */
+ reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
+ val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
+ writel(val, reg);
}
if (data->disable_oc) {
reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
@@ -260,6 +267,10 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data
*data)
val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
| MX53_USB_UHx_CTRL_ULPI_INT_EN;
writel(val, reg);
+ /* Disable internal 60Mhz clock */
+ reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
+ val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
+ writel(val, reg);
}
if (data->disable_oc) {
reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
--
2.1.4
