On Fri, Sep 16, 2016 at 3:51 AM, Lars-Peter Clausen <l...@metafoo.de> wrote: > On 09/07/2016 01:22 AM, John Stultz wrote: >> This patch adds support to Audio for both adv7511 and adv7533 >> bridge chips. >> >> This patch was originally from [1] by Lars-Peter Clausen <l...@metafoo.de> >> and was adapted by Archit Taneja <arch...@codeaurora.org> and >> Srinivas Kandagatla <srinivas.kandaga...@linaro.org>. >> >> Then I heavily reworked it to use the hdmi-codec driver. And also >> folded in some audio packet initialization done by Andy Green >> <andy.gr...@linaro.org>. So credit to them, but blame to me. >> >> [1] >> https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/gpu/drm/i2c/adv7511_audio.c >> >> Cc: David Airlie <airl...@linux.ie> >> Cc: Archit Taneja <arch...@codeaurora.org> >> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com> >> Cc: Wolfram Sang <wsa+rene...@sang-engineering.com> >> Cc: Srinivas Kandagatla <srinivas.kandaga...@linaro.org> >> Cc: "Ville Syrjälä" <ville.syrj...@linux.intel.com> >> Cc: Boris Brezillon <boris.brezil...@free-electrons.com> >> Cc: Andy Green <a...@warmcat.com> >> Cc: Dave Long <dave.l...@linaro.org> >> Cc: Guodong Xu <guodong...@linaro.org> >> Cc: Zhangfei Gao <zhangfei....@linaro.org> >> Cc: Mark Brown <broo...@kernel.org> >> Cc: Lars-Peter Clausen <l...@metafoo.de> >> Cc: Jose Abreu <joab...@synopsys.com> >> Cc: dri-de...@lists.freedesktop.org >> Signed-off-by: John Stultz <john.stu...@linaro.org> > > I'm not to fond of the hdmi-codec stuff, but within its context this looks > ok. Thanks for getting this upstream ready. Just one tiny bit regarding the > Kconfig entry. > > If that is fixed feel free to add on the next revision: > > Acked-by: Lars-Peter Clausen <l...@metafoo.de> > >> --- >> v3: >> * Allowed audio support to be configured in or out, as suggested by Laurent >> * Minor cleanups suggested by Laurent >> * Folded in Andy's audio packet initialization patch, as suggested by Archit >> >> drivers/gpu/drm/bridge/adv7511/Kconfig | 9 ++ >> drivers/gpu/drm/bridge/adv7511/Makefile | 1 + >> drivers/gpu/drm/bridge/adv7511/adv7511.h | 16 ++ >> drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 213 >> +++++++++++++++++++++++++ >> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 4 + >> 5 files changed, 243 insertions(+) >> create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c >> >> diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig >> b/drivers/gpu/drm/bridge/adv7511/Kconfig >> index d2b0499..b303ad1 100644 >> --- a/drivers/gpu/drm/bridge/adv7511/Kconfig >> +++ b/drivers/gpu/drm/bridge/adv7511/Kconfig >> @@ -3,9 +3,18 @@ config DRM_I2C_ADV7511 >> depends on OF >> select DRM_KMS_HELPER >> select REGMAP_I2C >> + select SND_SOC_HDMI_CODEC if SND_SOC > > This seems to be redundant considering the select done by > DRM_I2C_ADV7511_AUDIO. > >> help >> Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders. >> >> +config DRM_I2C_ADV7511_AUDIO >> + tristate "ADV7511 HDMI Audio driver" > > This should be bool. It either gets built into the ADV7511 driver (which > itself could either be a module or built-in) or not. But setting this option > itself to module wont work.
Ah! Thanks for the catch here! I really appreciate the feedback! I'll integrate those changes and respin the patch here shortly! thanks -john
