On Tue, Aug 09, 2016 at 04:36:07PM -0700, Tim Harvey wrote: Mostly looks good but quite a few issues with not using framework features here, a lot of the code can be factored out into the core:
> + /* DVB reference select is bit5 of DVBA reg */
> + mask = 1 << 5;
> +
> + if (mode != REGULATOR_MODE_STANDBY)
> + bit = mask; /* Select DVBB */
This will silently treat any mode other than standby identically which
is buggy, it should reject any mode not supported.
> +/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
> +static struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
> +};
Remove this, it's pointless.
> + node = of_get_child_by_name(dev->of_node, "regulators");
> + if (!node) {
> + dev_err(dev, "regulators node not found\n");
> + return -EINVAL;
> + }
> +
> + ret = of_regulator_match(dev, node, ltc3676_matches,
> + ARRAY_SIZE(ltc3676_matches));
Use the core support for parsing regulators from OF, don't open code it.
> + /* parse feedback voltage deviders: LDO3 doesn't have them */
> + for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
> + struct ltc3676_regulator *desc = <c3676->regulator_descs[i];
> + struct device_node *np = ltc3676_matches[i].of_node;
> + u32 vdiv[2];
There's a callback for parsing additional properties out of the
subnodes, of_parse_cb.
> +static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case LTC3676_IRQSTAT:
> + case LTC3676_BUCK1:
Please follow the kernel coding style.
> + dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat);
> + if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) {
> + dev_info(dev, "Over-temperature Warning\n");
dev_warn()
> +static void ltc3676_apply_fb_voltage_divider(struct ltc3676_regulator *rdesc)
> +{
> + struct regulator_desc *desc = &rdesc->desc;
> +
> + if (!rdesc->r1 || !rdesc->r2)
> + return;
This is a bug if we ever get here, we should be complaining loudly.
signature.asc
Description: PGP signature
