On Mon, 12 Feb 2007 18:56:29 +0100 "Martin A. Fink" <[EMAIL PROTECTED]> wrote:
> I have to store big amounts of data coming from 2 digital cameras to disk. > Thus I have to write blocks of around 1 MB at 30 to 50 frames per second for > a long period of time. So it is important for me that the harddisk drive is > reliable in the sense of "if it is capable of 50 MB/s then it should operate > at this speed. Constantly." Hard disks don't do this. They support operations/second based upon physical and rotational latency constraints, vibration levels, mechanism, internal layout policy and the need to do housekeeping. If you have an ATA7 drive with suitable firmware sets you can talk to it directly via the SG_IO interface and use the streaming feature set which is quite different to filesystem type operations and lets you ask the drive to do this sort of stuff - if you can find any general PC firmware ones that support it anyway. I'm not sure you'll get 50MB/sec sustained to work although you might with a good current drive used for nothing else, a linear stream of data (no seeking and file system overhead), and a non PCI controller (PCI Express, host chipset bus etc). If you are using a file system then the more you fsync the more I'd expect you to see stalling as you keep draining whats effectively an 8MB plus pipeline on a modern drive precisely because fsync does "hitting disk" guarantees. You also want to be sure you are not journalling data. Alan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
