Am Donnerstag, den 04.08.2016, 15:47 +0200 schrieb Fabien Lahoudere:
> We have the following messages that tell csi devices are not used:
> imx-ipuv3 18000000.ipu: no port@0 node in /soc/ipu@18000000, not using CSI0
> imx-ipuv3 18000000.ipu: no port@1 node in /soc/ipu@18000000, not using CSI1
>
> So we add them in the common device tree to make CSI ports available on
> imx53 boards.
>
> Signed-off-by: Fabien Lahoudere <fabien.lahoud...@collabora.co.uk>
> ---
> arch/arm/boot/dts/imx53.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
> index c1bc97c..0777b41 100644
> --- a/arch/arm/boot/dts/imx53.dtsi
> +++ b/arch/arm/boot/dts/imx53.dtsi
> @@ -136,6 +136,14 @@
> clock-names = "bus", "di0", "di1";
> resets = <&src 2>;
>
> + ipu_csi0: port@0 {
> + reg = <0>;
> + };
> +
> + ipu_csi1: port@1 {
> + reg = <1>;
> + };
> +
> ipu_di0: port@2 {
> #address-cells = <1>;
> #size-cells = <0>;
Acked-by: Philipp Zabel <p.za...@pengutronix.de>
regards
Philipp
