vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a
reg property. Remove their unit-address.
Solves:
Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no
reg property
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
Cc: Marek Vasut <ma...@denx.de>
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index e7b2109fc85a..d9ca7f214677 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -106,7 +106,7 @@
};
};
- vcc_3v3_reg: fixedregulator@0 {
+ vcc_3v3_reg: fixedregulator_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC 3V3";
regulator-min-microvolt = <3300000>;
@@ -115,7 +115,7 @@
regulator-always-on;
};
- vcc_mmc0_reg: fixedregulator@1 {
+ vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
regulator-name = "RST_n MCI0";
--
2.8.1
