This driver uses the P2SB hide/unhide mechanism cooperatively
to pass the PCI BAR address to the gpio platform driver.

Signed-off-by: Tan Jui Nee <jui.nee....@intel.com>
---
Changes in V5:
        - Split lpc-ich driver into two parts (lpc_ich-core and lpc_ich-apl).
          The file lpc_ich-apl.c introduces gpio platform driver in MFD.
        - Rename Kconfig option CONFIG_X86_INTEL_NON_ACPI to 
CONFIG_X86_INTEL_APL
          so that it reflects actual product as suggested by Mika.

Changes in V4:
        - Move Kconfig option CONFIG_X86_INTEL_NON_ACPI from
          [PATCH 2/3] x86/platform/p2sb: New Primary to Sideband bridge support 
driver for Intel SOC's
          to
          [PATCH 3/3] mfd: lpc_ich: Add support for Intel Apollo Lake GPIO 
pinctrl in non-ACPI system
          since the config is used in latter patch.
        - Select CONFIG_P2SB when CONFIG_LPC_ICH is enabled.
        - Remove #ifdef CONFIG_X86_INTEL_NON_ACPI and use
          #if defined(CONFIG_X86_INTEL_NON_ACPI) when lpc_ich_misc is called
          as suggested by Lee Jones.
        - Use single dimensional array instead of 2D array for apl_gpio_io_res
          structure and use DEFINE_RES_IRQ for its IRQ resource.

Changes in V3:
        - Simplify register addresses calculation and use DEFINE_RES_MEM_NAMED
          defines for apl_gpio_io_res structure
        - Define magic number for P2SB PCI ID
        - Replace switch-case with if-else since currently we have only one
          use case
        - Only call mfd_add_devices() once for all gpio communities

Changes in V2:
        - Add new config option CONFIG_X86_INTEL_NON_ACPI and "select PINCTRL"
          to fix kbuildbot error

 arch/x86/Kconfig            |   9 ++++
 drivers/mfd/Kconfig         |   3 +-
 drivers/mfd/Makefile        |   2 +-
 drivers/mfd/lpc_ich-apl.c   | 126 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/mfd/lpc_ich-core.c  |  11 ++++
 include/linux/mfd/lpc_ich.h |   7 +++
 6 files changed, 156 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mfd/lpc_ich-apl.c

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d305d81..e1865c7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -498,6 +498,15 @@ config X86_GOLDFISH
         for Android development. Unless you are building for the Android
         Goldfish emulator say N here.
 
+config X86_INTEL_APL
+       bool "Non-ACPI support for Intel Apollo Lake platforms"
+       select PINCTRL
+       ---help---
+         Select this option to enable MMIO BAR access over the P2SB for
+         non-ACPI Intel Apollo Lake SoC platforms. This driver uses the P2SB
+         hide/unhide mechanism cooperatively to pass the PCI BAR address to
+         the platform driver, currently GPIO.
+
 config X86_INTEL_CE
        bool "CE4100 TV platform"
        depends on PCI
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1bcf601..dc4e543 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -369,8 +369,9 @@ config MFD_INTEL_QUARK_I2C_GPIO
 
 config LPC_ICH
        tristate "Intel ICH LPC"
-       depends on PCI
+       depends on X86 && PCI
        select MFD_CORE
+       select P2SB
        help
          The LPC bridge function of the Intel ICH provides support for
          many functional units. This driver provides needed support for
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1dfe5fb..7572c1f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -155,7 +155,7 @@ obj-$(CONFIG_PMIC_ADP5520)  += adp5520.o
 obj-$(CONFIG_MFD_KEMPLD)       += kempld-core.o
 obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o
 obj-$(CONFIG_LPC_SCH)          += lpc_sch.o
-lpc_ich-objs           := lpc_ich-core.o
+lpc_ich-objs           := lpc_ich-core.o lpc_ich-apl.o
 obj-$(CONFIG_LPC_ICH)          += lpc_ich.o
 obj-$(CONFIG_MFD_RDC321X)      += rdc321x-southbridge.o
 obj-$(CONFIG_MFD_JANZ_CMODIO)  += janz-cmodio.o
diff --git a/drivers/mfd/lpc_ich-apl.c b/drivers/mfd/lpc_ich-apl.c
new file mode 100644
index 0000000..544e83a
--- /dev/null
+++ b/drivers/mfd/lpc_ich-apl.c
@@ -0,0 +1,126 @@
+/*
+ * Purpose: Create a platform device to bind with Intel Apollo Lake
+ * Pinctrl GPIO platform driver
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/lpc_ich.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <asm/p2sb.h>
+
+#if defined(CONFIG_X86_INTEL_APL)
+/* Offset data for Apollo Lake GPIO communities */
+#define APL_GPIO_SOUTHWEST_OFFSET      0xc00000
+#define APL_GPIO_NORTHWEST_OFFSET      0xc40000
+#define APL_GPIO_NORTH_OFFSET          0xc50000
+#define APL_GPIO_WEST_OFFSET           0xc70000
+
+#define APL_GPIO_SOUTHWEST_NPIN                43
+#define APL_GPIO_NORTHWEST_NPIN                77
+#define APL_GPIO_NORTH_NPIN            78
+#define APL_GPIO_WEST_NPIN             47
+
+#define APL_GPIO_IRQ 14
+
+#define PCI_IDSEL_P2SB 0x0d
+
+static struct resource apl_gpio_io_res[] = {
+       DEFINE_RES_MEM_NAMED(APL_GPIO_NORTH_OFFSET,
+               APL_GPIO_NORTH_NPIN * SZ_8, "apl_pinctrl_n"),
+       DEFINE_RES_MEM_NAMED(APL_GPIO_NORTHWEST_OFFSET,
+               APL_GPIO_NORTHWEST_NPIN * SZ_8, "apl_pinctrl_nw"),
+       DEFINE_RES_MEM_NAMED(APL_GPIO_WEST_OFFSET,
+               APL_GPIO_WEST_NPIN * SZ_8, "apl_pinctrl_w"),
+       DEFINE_RES_MEM_NAMED(APL_GPIO_SOUTHWEST_OFFSET,
+               APL_GPIO_SOUTHWEST_NPIN * SZ_8, "apl_pinctrl_sw"),
+       DEFINE_RES_IRQ(APL_GPIO_IRQ),
+};
+
+static struct pinctrl_pin_desc apl_pinctrl_pdata;
+
+static struct mfd_cell apl_gpio_devices[] = {
+       {
+               .name = "apl-pinctrl",
+               .id = 0,
+               .num_resources = ARRAY_SIZE(apl_gpio_io_res),
+               .resources = apl_gpio_io_res,
+               .pdata_size = sizeof(apl_pinctrl_pdata),
+               .platform_data = &apl_pinctrl_pdata,
+               .ignore_resource_conflicts = true,
+       },
+       {
+               .name = "apl-pinctrl",
+               .id = 1,
+               .num_resources = ARRAY_SIZE(apl_gpio_io_res),
+               .resources = apl_gpio_io_res,
+               .pdata_size = sizeof(apl_pinctrl_pdata),
+               .platform_data = &apl_pinctrl_pdata,
+               .ignore_resource_conflicts = true,
+       },
+       {
+               .name = "apl-pinctrl",
+               .id = 2,
+               .num_resources = ARRAY_SIZE(apl_gpio_io_res),
+               .resources = apl_gpio_io_res,
+               .pdata_size = sizeof(apl_pinctrl_pdata),
+               .platform_data = &apl_pinctrl_pdata,
+               .ignore_resource_conflicts = true,
+       },
+       {
+               .name = "apl-pinctrl",
+               .id = 3,
+               .num_resources = ARRAY_SIZE(apl_gpio_io_res),
+               .resources = apl_gpio_io_res,
+               .pdata_size = sizeof(apl_pinctrl_pdata),
+               .platform_data = &apl_pinctrl_pdata,
+               .ignore_resource_conflicts = true,
+       },
+};
+
+int lpc_ich_misc(struct pci_dev *dev)
+{
+       unsigned int apl_p2sb = PCI_DEVFN(PCI_IDSEL_P2SB, 0);
+       unsigned int i;
+       int ret;
+
+       /*
+        * Apollo lake, has not 1, but 4 gpio controllers,
+        * handle it a bit differently.
+        */
+
+       for (i = 0; i < ARRAY_SIZE(apl_gpio_io_res)-1; i++) {
+               struct resource *res = &apl_gpio_io_res[i];
+
+               apl_gpio_devices[i].resources = res;
+
+               /* Fill MEM resource */
+               ret = p2sb_bar(dev, apl_p2sb, res++);
+               if (ret)
+                       goto warn_continue;
+
+               apl_pinctrl_pdata.name = kasprintf(GFP_KERNEL, "%u",
+                       i + 1);
+       }
+
+       if (apl_pinctrl_pdata.name)
+               ret = mfd_add_devices(&dev->dev, apl_gpio_devices->id,
+                       apl_gpio_devices, ARRAY_SIZE(apl_gpio_devices),
+                               NULL, 0, NULL);
+       else
+               ret = -ENOMEM;
+
+warn_continue:
+       if (ret)
+               dev_warn(&dev->dev,
+                       "Failed to add Apollo Lake GPIO %s: %d\n",
+                               apl_pinctrl_pdata.name, ret);
+
+       kfree(apl_pinctrl_pdata.name);
+       return 0;
+}
+#endif
diff --git a/drivers/mfd/lpc_ich-core.c b/drivers/mfd/lpc_ich-core.c
index bd3aa45..1e957d4 100644
--- a/drivers/mfd/lpc_ich-core.c
+++ b/drivers/mfd/lpc_ich-core.c
@@ -216,6 +216,7 @@ enum lpc_chipsets {
        LPC_BRASWELL,   /* Braswell SoC */
        LPC_LEWISBURG,  /* Lewisburg */
        LPC_9S,         /* 9 Series */
+       LPC_APL,        /* Apollo Lake SoC */
 };
 
 static struct lpc_ich_info lpc_chipset_info[] = {
@@ -531,6 +532,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
                .name = "9 Series",
                .iTCO_version = 2,
        },
+       [LPC_APL]  = {
+               .name = "Apollo Lake SoC",
+               .iTCO_version = 5,
+       },
 };
 
 /*
@@ -679,6 +684,7 @@ static const struct pci_device_id lpc_ich_ids[] = {
        { PCI_VDEVICE(INTEL, 0x3b14), LPC_3420},
        { PCI_VDEVICE(INTEL, 0x3b16), LPC_3450},
        { PCI_VDEVICE(INTEL, 0x5031), LPC_EP80579},
+       { PCI_VDEVICE(INTEL, 0x5ae8), LPC_APL},
        { PCI_VDEVICE(INTEL, 0x8c40), LPC_LPT},
        { PCI_VDEVICE(INTEL, 0x8c41), LPC_LPT},
        { PCI_VDEVICE(INTEL, 0x8c42), LPC_LPT},
@@ -1093,6 +1099,11 @@ static int lpc_ich_probe(struct pci_dev *dev,
                        cell_added = true;
        }
 
+       if (priv->chipset == LPC_APL) {
+               ret = lpc_ich_misc(dev);
+               if (!ret)
+                       cell_added = true;
+       }
        /*
         * We only care if at least one or none of the cells registered
         * successfully.
diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h
index 2b300b4..c5d0adc 100644
--- a/include/linux/mfd/lpc_ich.h
+++ b/include/linux/mfd/lpc_ich.h
@@ -43,4 +43,11 @@ struct lpc_ich_info {
        u8 use_gpio;
 };
 
+#if defined(CONFIG_X86_INTEL_APL)
+int lpc_ich_misc(struct pci_dev *dev);
+#else
+static inline int lpc_ich_misc(struct pci_dev *dev)
+{ return -ENODEV; }
+#endif
+
 #endif
-- 
1.9.1

Reply via email to