A bugfix for the fintek driver required defining some macros, but
one of them clashes with a system header on ARM:
drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined
[-Werror]
#define IRQ_MODE 0x70
In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0,
from /git/arm-soc/arch/arm/include/asm/irqflags.h:6,
from /git/arm-soc/include/linux/irqflags.h:15,
from /git/arm-soc/arch/arm/include/asm/bitops.h:27,
from /git/arm-soc/include/linux/bitops.h:36,
from /git/arm-soc/include/linux/kernel.h:10,
from /git/arm-soc/include/linux/list.h:8,
from /git/arm-soc/include/linux/module.h:9,
from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11:
arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the
previous definition
This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE.
Signed-off-by: Arnd Bergmann <a...@arndb.de>
Fixes: 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode")
---
drivers/tty/serial/8250/8250_fintek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_fintek.c
b/drivers/tty/serial/8250/8250_fintek.c
index 737b4b3957b0..0facc789fe7d 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -31,7 +31,7 @@
#define IO_ADDR2 0x60
#define LDN 0x7
-#define IRQ_MODE 0x70
+#define FINTEK_IRQ_MODE 0x70
#define IRQ_SHARE BIT(4)
#define IRQ_MODE_MASK (BIT(6) | BIT(5))
#define IRQ_LEVEL_LOW 0
@@ -195,7 +195,7 @@ static int fintek_8250_set_irq_mode(struct fintek_8250
*pdata, bool level_mode)
outb(LDN, pdata->base_port + ADDR_PORT);
outb(pdata->index, pdata->base_port + DATA_PORT);
- outb(IRQ_MODE, pdata->base_port + ADDR_PORT);
+ outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT);
tmp = inb(pdata->base_port + DATA_PORT);
tmp &= ~IRQ_MODE_MASK;
--
2.9.0
